Inventario de Equipo Seminuevo - TP | Global Medical Equipment

Baxter+AS40A Infusion Pump
Inventario de Equipo Seminuevo
Infusion Pump
This infusion pump allows for accurate continuous or intermittent infusion in any one of
four routes: intravenous, intra-arterial, epidural, or subcutaneous. This system features a
numeric keypad, pre-programmable bolus operation, titration without fluid interruption,
alarm and alert systems. Additionally, the syringe manufacturer, automatic syringe size
recognition, infusion mode, maximum infusion rate, occlusion sensitivity, and the keypad
lock can all be configured by the user. The system accepts syringes ranging from 1 -
60mL and comes with a pole and built-in IV loop. The unit can be used either while on its
internal rechargable battery or while charging, it can also be used as a table top pump.
Baxter+BW-5 Blood Warmer
Specifications: 3.4" x 2.6" x10"; 2.75lbs
.01mL/hr - 360mL/hr flow rate depending on syringe
105V-125V Hz
12 hours approximate battery life
Blood Warmer
Baxter+Colleague Infusion Pump Infusion Pump
Baxter+COM-2 Cardiac Output Computer Cardiac Output Computer
Baxter+COM-2P-115 Cardiac output w printer, missing probe and cable Cardiac output w printer, missing probe and cable
Desflurane Vaporizer
Baxter+D-Vapor Desflurane Vaporizer
This anaesthetic vaporizer heats and calibrates suprane (the anasthetic agent
desflurane) in concentrations ranging from 2% - 18% per volume unit in order to enrich
the dry medical gas in an anesthesia delivery system.
Baxter+DW-100A Fluid Warmer Fluid Warmer
Baxter+Fenwal Blood Warmer Blood Warmer
Warmer
Baxter+Fibrimotherm Warmer
This unit provides the recommended heating and stirring conditions needed for the
reconstitution of fibrin-based surgical sealant.
Pump, IV
Baxter+Floguard-6200 Pump, IV
Baxter+Floguard-6201 Pump, IV
This infusion pump is designed to delivery a wide variety of fluids, including blood, over
a broad range of infusion rates, 1-999mL/hr in 1mL increments. This pump is easy to
load and includes a spill resistant pumping mechanism with occulsion sensors that can
detect both downstream and upstream restrictions.
Specifications: 9.5"W x 11"H x 6"D; 14 lbs
115Vac 60Hz 10W
Pump, IV
This single-channel, volumetric infusion pump system features a programmable delivery
profile allowing up to 10 steps for individualized control of infusion ramping and tapering.
This pump additionally automatically calcultes the flow rate after time and volume are
selected, has a side clamp option to prevent inadvertent gravity free flow, a front panel
lock to prevent tampering, automatic restart after occlusion clears, and automatic
piggybacking. Pump delivers medications at a flow rate between 1-99.9mL/hr in
0.1mL/hr increments and 1-1,999mL/hr in 1mL/hr increments.
BAXTER+IMMUNO TISSOMAT
Specifications: 11.4"H x 8"W x 5.1"D; 11.6 lbs
115Vac, 60Hz, 30W
6hr approximate battery life at 1 400mL/hr flow rate
Baxter+K-20 Pad Warmer Pad Warmer
Heat Therapy Pump
Baxter+K-MOD100 Heat Therapy Pump
By supplying temperature controlled water through a connector hose, this pump adjusts
the temperature of the pad to the desired set temperature. A key is required to set the
temperature in order to prevent any tampering. Heat therapy is used for many reasons
but the most common is to alleviate pains and aches in joints and muscles.
Specifications: 85F - 95F temperature set point range with an accurancy with 2F
Flow rate is about 9gph (34lph) with the pad attached
51 oz (1500ml) reservoir capacity