Scotchmate™ Reclosable Fasteners SJ3576/SJ3577 - 3M

3M Scotchmate Reclosable Fasteners
SJ3576 (polyester hook)
SJ3577 (polyester loop)
Certification/
Recognition
Product Use
Warranty and
Limited Remedy
Limitation of Liability
3
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (fax)
www.3M.com/industrial
MSDS: 3M has not prepared a MSDS for these products which are not subject to the MSDS requirements
of the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R.
1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions for
use, these products should not present a health and safety hazard. However, use or processing of the
products in a manner not in accordance with the directions for use may affect their performance and
present potential health and safety hazards.
TSCA: These products are defined as an article under the Toxic Substances Control Act and therefore,
are exempt from inventory listing requirements.
Mil Spec. MIL-F-21840: 3M Scotchmate Reclosable Fastener SJ3577 meets the physical
requirements of Mil spec. MIL-F-21840, Type II, Class 1. 3M Scotchmate Reclosable Fastener
SJ3576 meets the physical requirements of MIL-F-21840, Class 1. MIL-F-21840, Type II, Class 5
requirements are met by engaging Scotchmate reclosable fastener SJ3576, or any of our nylon
Scotchmate loop products, to any polyester Scotchmate hook product such as SJ3476, SJ3486FR, or
SJ3586FR.
GM 2743M Type II: Scotchmate reclosable fasteners SJ3576 and SJ3577 meet the requirements of
GM 2743 Type II.
GM 3618M Scotchmate reclosable fasteners SJ3576 and SJ3577 meet the requirements of GM 3618.
FMVSS-302: Scotchmate reclosable fasteners SJ3576 and SJ3577 pass FMVSS-302 when tested
attached to a thin metal panel.
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system
registered to ISO 9001:2000 and ISO/TS 16949:2002 standards.
- 6 -
ISO 9001:2000 - ISO/TS 16949:2002
Recycled Paper
40% pre-consumer
10% post-consumer
3M, Dual Lock and Scotchmate are
trademarks of 3M Company.
Printed in U.S.A.
©3M 2008 70-0709-3957-7 (3/08)