CFA MOBIL - Kurawah Fire System Sdn Bhd
CFA MOBIL - Kurawah Fire System Sdn Bhd
CFA MOBIL - Kurawah Fire System Sdn Bhd
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Operating instructions<br />
<strong>CFA</strong> <strong>MOBIL</strong><br />
8. Servicing<br />
Tightening screw 4 Motor clamping screws<br />
For this purpose, the clamping screws of the motor should be unscrewed and the<br />
tightening screws tightened as required. Subsequently, retighten the motor clamping<br />
screws. Care should be taken to ensure that the belt pulleys are flush. Otherwise the wear<br />
on the V-belt will be excessive.<br />
Replacing of the V-belt<br />
Unscrew the clamping screws as described above and unscrew the tightening screws<br />
such that the motor can be pushed forward up to the stop. Subsequently, put on the new<br />
belt and tension it as described above.<br />
8.3. Servicing of the pump<br />
8.3.1. Servicing intervals<br />
after 50 operating hours:<br />
Oil change<br />
Subsequently, every 200 operating hours or after six months:<br />
Oil change<br />
If required, i.e. in the case of condensation forming in the crankcase:<br />
Oil change<br />
Brandschutztechnik Müller GmbH<br />
Kasseler Str. 37 – 39, 34289 Zierenberg, Germany<br />
Tel. +49 (0)5606/5182-50, Fax: +49 (0)5606/5182-55<br />
Email: fertigung@brandschutztechnikmueller.de<br />
23