CHAPTER 1 - Universiti Malaysia Pahang
CHAPTER 1 - Universiti Malaysia Pahang
CHAPTER 1 - Universiti Malaysia Pahang
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The sugarcane fiber (pith & rind) is washed and<br />
dried at 80 oC, then ground<br />
Virgin polypropylene is<br />
mixed with a<br />
PITH FIBER content of<br />
10wt% to 50wt% for 250g<br />
total raw material<br />
Figure 3.2: Flowchart of Research Methodology<br />
Virgin polypropylene is<br />
mixed with a<br />
RIND FIBER content of<br />
10wt% to 50wt% for 250g<br />
total raw material<br />
Sugarcane fiber (pith & rind) and virgin polypropylene are<br />
blended through extrusion<br />
at temp 190 o C and screw speed 70-170rpm<br />
The compounded material is then injection molded at a<br />
temperature of 170 o C and pressure of 28%<br />
The specimens are then subjected to tensile testing,<br />
density and MFI determination<br />
The tensile strength, elongation modulus and<br />
break strain<br />
19