Ball Bearing - Timken

Ball Bearing
Specialty Bearings
200 Series
Bore O.D. Width
Part d D W Special Features Description
Number Inch mm Inch mm Inch mm
203-FF5 0.460 - 1.575 40 0.472 12 Special Belt Idler Pulley Bearing
202-FFH8 0.500 - 1.529 - 0.433 11 Special 202FF with 1/2" Bore and 1.5290"
Spherical O.D.
205-RRB 0.510 - 2.047 52 1.375 - Special Bore with Wide I.R.
205-RRUN 0.510 - 2.047 52 1.500 - Special Bore with Wide I.R.
203-RRAR8 0.515 - 1.575 40 0.720 - Special Bore and Width
202-RRE 0.591 15 1.378 35 0.878 - Basic 202 Double Sealed with .8780 Extended I.R.
and "Y" Seals
S-202-FF 0.591 15 1.378 35 0.433 11 Basic 202FF with Spherical O.D.
202-FFB 0.625 - 1.375 - 0.500 - Basic 202FF with 5/8" Bore, 1-3/8" O.D. 1/2" Width
202-FFLB 0.625 - 1.375 - 0.433 11 Special 5/8" Bore and 1-3/8" O.D. with Snap Ring
202-CC1 0.625 - 1.378 35 0.433 11 Basic 202FF with 5/8" Bore
204-BBE 0.626 - 1.781 - 0.610 - Special .6260 Bore, Double Sealed
204-FGB 0.626 - 1.850 47 0.686 - Special .6260 Bore, Wide I.R., Double Sealed
204-FRK 0.626 - 1.850 47 0.689 - Special Wide I.R. and Internal Clearance, Double
Sealed
204-TJN 0.626 - 1.850 47 1.125 - Special Disc Bearing with one Triple Lip Seal
205-RANA 0.626 - 2.047 52 0.828 - 205RRAN with 5/8" Bore
205-RVBA 0.626 - 2.047 52 0.703 - Special Bore with Wide I.R. Double Lip "V" Seal on
One Side.
204-FVMN 0.628 - 1.781 - 0.733 - Special Bore, O.D. and Width, Nylon Retainer
202-CC16 0.630 16 1.378 35 0.433 11 Basic 202FF with 16mm Bore
8980-DD 0.630 16 1.575 40 0.472 12 Special AG Bearing
205-VVH 0.631 - 2.090 - 1.375 - Special Bore and I.D. with Two Double Lip "V"
Seals & Snap Ring Groove
204-FREN 0.632 - 1.781 - 0.733 - Special 204 with Wide I.R., Double Sealed
203-RRAR10 0.635 - 1.575 40 0.720 - Special Bore and Width
203-RRH10 0.635 - 1.850 47 0.720 - Special Bore, O.D. and Width
203-RRAR10N2 0.640 - 1.575 40 0.720 - Special Bore and Width with Class 2 Internal
Clearance
59