Magelis XBTGC, XBTGT, XBTGK HMI Controller - Schneider Electric

More documents

Recommendations

Info

XBT GC System Functions HMI_GetRightBusStatus: Returns the Status of the Expansion Bus Function Description Graphical Representation IL and ST Representation I/O Variables Description This function returns the I/O Expansion Bus status in a bit field. Following the input parameter (Mask), the function returns a configuration diagnostic on the I/O expansion bus (I/O expansion bus configuration mismatch with plugged modules) or a detailed diagnostic of the requested expansion analog I/O module. NOTE: The HMI_GetRightBusStatus function is applicable for XBT GC HMI Controller only. To see the general representation in IL or ST language, refer to the Function and Function Block Representation (see page 43) chapter. The following table describes the input parameter: Input Type Comment Mask RIGHTBUS_GET_STATUS (see page 40) The following table describes the output variable: Defines the type of I/O expansion bus diagnostic returned by the function: bus configuration or one of the 3 possible expansion modules. Output Type Comment HMI_GetRightBusStatus WORD I/O expansion bus diagnostic. see details below 24 EIO0000000626 06/2011
I/O Expansion Bus Generic Diagnostic XBT GC System Functions The table below describes the bit field returned by the function HMI_GetRightBusStatus when the input parameter (Mask) is RIGHT_BUS_GET_GEN_STATUS (see page 40) for a configuration diagnostic of the expansion bus (0000 hex if no detected error): Bit Description 0 Reserved (always 0) 1 TRUE if the TM2 module 1 configuration mismatches with plugged module. 2 TRUE if the TM2 module 2 configuration mismatches with plugged module. 3 TRUE if the TM2 module 3 configuration mismatches with plugged module. 4..15 Reserved (always 0) I/O Expansion Bus Modules Diagnostic The tables below describe the bit field returned by the function HMI_GetRightBusStatus when the input parameter (Mask) is RIGHTBUS_GET_STATUSx (see page 40) (where x=1 to 3) for a detailed diagnostic of the expansion module "x". NOTE: The detailed diagnostic is valid for analog I/O modules only and the bit field meaning depends on the type of the concerned analog module. When the associated module is a standard analog I/O module (up to 2 input channels): TM2AMM3HT TM2ALM3LT TM2AMI2HT TM2AMI2LT TM2AVO2HT TM2AMO1HT Bit Description 0 All analog channels in normal state 1 Module in initialization state 2 Power supply not operating correctly 3 Incorrect configuration - analysis needed 4 Conversion process for input channel 0 5 Conversion process for input channel 1 6 Invalid parameter for input channel 0 7 Invalid parameter for input channel 1 8 Not used EIO0000000626 06/2011 25
Page 1 and 2: EIO0000000626.03 EIO0000000626 06/2
Page 3 and 4: Table of Contents Safety Informatio
Page 5 and 6: Important Information NOTICE Safety
Page 7 and 8: At a Glance Document Scope Validity
Page 9 and 10: Overview XBT GC System Variables EI
Page 11 and 12: Understanding System Variables Intr
Page 13 and 14: Using System Variables Introduction
Page 15 and 16: 1.2 PLC_R and PLC_W Structures Over
Page 17 and 18: Var Name Type Comment XBT GC System
Page 19 and 20: 1.3 SERIAL_R and SERIAL_W Structure
Page 21 and 22: SERIAL_W[0..1]: Serial Line Read /
Page 23: XBT GC System Functions EIO00000006
Page 27 and 28: Example XBT GC System Functions The
Page 29 and 30: HMI_IsFirstMastCycle: Indicates if
Page 31 and 32: XBT GC System Functions HMI_IsFirst
Page 33 and 34: Overview XBT PLC System Library Dat
Page 35 and 36: XBT PLC System Library Data Types P
Page 37 and 38: PLC_R_STATUS: Controller Status Cod
Page 39 and 40: PLC_W_COMMAND: Control Command Code
Page 41 and 42: EIO0000000626 06/2011 Appendices EI
Page 43 and 44: Overview Function and Function Bloc
Page 45 and 46: How to Use a Function or a Function
Page 47 and 48: Using a Function Block in IL langua
Page 49 and 50: Using a Function Block in ST Langua
Page 51 and 52: 1-phase counter 2-phase counter BOO
Page 53 and 54: expansion bus E Glossary The expans
Page 55 and 56: Modbus NEMA PLC PLI POU PTO M The M
Page 57 and 58: U unlocated variable An unlocated v
Page 59 and 60: Index EIO0000000626 06/2011 Index D

Magelis XBTGC, XBTGT, XBTGK HMI Controller - Schneider Electric

Create successful ePaper yourself

Delete template?

Save as template?