540 Telescoping Tilt-Tower Tire Changer

More documents

Recommendations

Info

540 TIRE CHANGER 540 ACCESSORIES PROVIDED Bead Lifting Lever Part Number 502-1026-83 Tower Tabs (5) Part Number 502-1007-98 Zeppa Low Profile Tire Assist Part Number 502-1020-95 Lube Reservoir and Brush Part Number 502-0013-52 Always pay careful attention to the WARNING SIGNS shown on adhesives applied to the machine. If one or more of the warning decals disappears or shows signs of deterioration, you can order a replacement decal from Kwik-Way. Figure 5 Head Decal Part Number 502-1009-82 Electrical Voltage Decal Part Number 502-1007-89 Bead-Breaker Decal Part Number 502-1009-83 Tilt Column” Decal Part Number 502-1007-76 Figure 5 KW Products Inc. 800-553-5953 10 500 57 th Street, Marion, IA 52302 USA Copyright 2004 All Rights Reserved Equipment specifications, options and accessories subject to change without
MACHINE OPERATION 540 TIRE CHANGER PRELIMINARY OPERATIONS It is highly recommended that you study and familiarize yourself with the nomenclature of the machine before attempting operation. BEAD-BREAKING Figure 6 In preparation for the bead breaking operation, remove the valve stem core and completely deflate the tire. Remove any wheel weights, which are present. NOTE: If the tire is being removed for repair, and the assembly is not to be rebalanced, mark the location of the tire to the stem and all weight locations prior to removal. This will provide a reference for remounting the tire and placing the weights at the location from where they were removed. Figure 6 1. Place the wheel assembly against the bead breaker pads and carefully position the breaker blade so as to have the radius of the blade slightly inside the radius of the wheel. 2. Step down on the bead breaker pedal (B) the blade will push the tire bead away from the wheel flange. 3. Repeat the operation at various points around the wheel and on both sides of the wheel. NOTE: It is highly recommended when breaking beads on alloy or chrome wheels to use the optional bead blade protector PN 502-1018-00 to prevent scratching or other possible damage. When using the bead-breaking arm take care not to have hands between the tire and the bead-breaker! KW Products Inc. 800-553-5953 11 500 57 th Street, Marion, IA 52302 USA Copyright 2004 All Rights Reserved Equipment specifications, options and accessories subject to change without
Page 1: 540 Telescoping Tilt-Tower Tire Cha
Page 5 and 6: RECEIVING SHIPMENT 540 TIRE CHANGER
Page 7 and 8: SAFETY INSTRUCTIONS 540 TIRE CHANGE
Page 9 and 10: UNPACKING 540 TIRE CHANGER On recei
Page 11 and 12: See Figure 3 1) PEDAL CONTROLS MACH
Page 13: 26" Adjustable Jaws 540 TIRE CHANGE
Page 17 and 18: 540 TIRE CHANGER MACHINE OPERATION
Page 19 and 20: ROUTINE MAINTENANCE 540 TIRE CHANGE
Page 21 and 22: PART NUMBER REFERENCES (SQUARE TABL
Page 23 and 24: 540 TIRE CHANGER PART NUMBER REFERE
Page 25 and 26: 540 TIRE CHANGER PART NUMBER REFERE
Page 27 and 28: WARNINGS 540 TIRE CHANGER The prese
Page 29 and 30: 540 TIRE CHANGER 2. Sometimes durin
Page 31 and 32: 540 TIRE CHANGER TECNOROLLER III-SL
Page 33 and 34: 540 TIRE CHANGER FOLLOWER ARM PART
Page 35 and 36: 540 TIRE CHANGER 5. Simultaneously
Page 38: KW Products Inc. 500 57 th St., Mar

540 Telescoping Tilt-Tower Tire Changer

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?