Gardens - Neptune

156
Neptune
IsoGuard
is a unique product that
protects your wood from
the elements. The clever
part is how it works. Instead
of applying a layer on top
of your timber, IsoGuard
is designed to penetrate
the timber surface and
bond with each wood fibre
at a molecular level. More
importantly IsoGuard does
not like to bond to itself.
This advanced technology
offers several major benefits.
Firstly, it means that one
application of both the
primer and top coat is
all you need. In fact a
further application will not
achieve anything at all!
This means that the
character of the wood is
completely retained as there
is no surface build up.
Finally it means that any
repairs are wonderfully
simple as a second
treatment will only react
with unprotected wood
created by the damage
or subsequent repair.
neptune.com
IsoGuard Exterior Topcoat
& Primer Kit
ISOG-NAT-SET
: 0.5 litre x2
Kr 1,450
How to treat
your furniture
Ensure that your piece of
furniture is completely clean
and dry. IsoGuard will not
be able to cure if the timber
is damp. You are then ready
to apply a thin layer of our
IsoGuard Primer. This needs
to be applied with a lint free
cloth. Once the primer has
dried our IsoGuard Top
Coat can be applied. Your
furniture is now protected,
it really is that simple!
Please note: the IsoGuard
treatment requires
24-36 hours curing time
before the surface will be
sufficiently protected and
it will take a full 3 weeks
to completely cure.
We recommend an annual
treatment of your furniture
with IsoGuard to ensure
it remains fully protected.
Cleaning your
timber
Cleaning your timber garden
furniture is also very easy.
Once the curing process is
complete you are able to
wash your timber with a
warm soapy wood cleaner
which is widely available.
IsoGuard will protect
your wood against most
accidents, including spillages
of water, tea, coffee, wine,
fizzy drinks, vinegar, olive
oil, milk and lemon juice.
However we do recommend
that you wipe up spillages
as soon as you find them.
In the unlikely event that
your furniture does mark
it is very easy to rectify by
simply sanding the area with
a 180-220 Grit paper and
re-applying IsoGuard top
coat with a cloth. Leave for
10 minutes and remove any
excess – problem solved!
When should you
treat your furniture?
If you wish to keep your
wooden table’s original
colouring we recommend
applying IsoGuard as soon
as possible after purchase.
This will ensure the beautiful
nutty brown colouring
will remain intact and will
not weather to it’s natural
silver-grey. If applied after
weathering has occurred
the colour will not change
and the natural silver
grey finish will remain.
Above all the application
retains a natural finish to
your furniture whatever
your chosen colour.
157