Section 5 Pipe and Tube Sizes
Section 5 Pipe and Tube Sizes
Section 5 Pipe and Tube Sizes
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Amari Metals Ltd Tel. 0181 481 3300 Copyright Protected<br />
<strong>Pipe</strong> <strong>and</strong> <strong>Tube</strong> <strong>Sizes</strong><br />
<strong>Pipe</strong> <strong>and</strong> <strong>Tube</strong> - DIN<br />
The DIN st<strong>and</strong>ards for stainless steel pipe <strong>and</strong> tube dimensions <strong>and</strong> weights are<br />
described below, together with a list of applicable DIN technical delivery st<strong>and</strong>ards.<br />
DIN <strong>Pipe</strong> <strong>and</strong> <strong>Tube</strong> Specifications<br />
❍ DIN 2462 Part 1 ‘Seamless stainless steel tubes,<br />
Dimensions <strong>and</strong> masses per unit length’. This<br />
st<strong>and</strong>ard covers austenitic, ferritic <strong>and</strong> martensitic<br />
stainless steel tubes <strong>and</strong> defines dimensions,<br />
weights <strong>and</strong> tolerances.<br />
DIN <strong>Tube</strong> <strong>Sizes</strong><br />
❍ DIN 2463 Part 1 ’Welded austenitic stainless<br />
steel pipes <strong>and</strong> tubes’. This st<strong>and</strong>ard covers<br />
welded austenitic stainless steel tubes <strong>and</strong><br />
defines dimensions, weights <strong>and</strong> tolerances.<br />
DIN 2462 <strong>and</strong> DIN 2463 tubes comply with the dimensions <strong>and</strong> weights per metre specified in ISO 1127 (see<br />
pages 5-8 to 5-14). DIN 2462 covers seamless tube from 6 mm to 406.4 mm OD <strong>and</strong> from 1 mm to 14.2 mm<br />
wall thickness. DIN 2463 covers welded tube from 6 mm to 1016 mm OD <strong>and</strong> from 1 mm to 8.8 mm wall<br />
thickness.<br />
Tolerances - DIN 2462 <strong>and</strong> DIN 2463<br />
DIN 2462 <strong>and</strong> 2463 specify the following ISO 5252 defined tolerances (see page 5-8):<br />
Tolerances specified in DIN 2462 <strong>and</strong> DIN 3463<br />
DIN St<strong>and</strong>ard<br />
<strong>and</strong><br />
Manufacturing<br />
Process<br />
DIN 2462<br />
Cold Worked<br />
DIN 2462<br />
Hot Worked<br />
DIN 2463<br />
Welded<br />
Outside<br />
Diameter<br />
(OD)<br />
219.1 to<br />
610 mm<br />
168.3 mm<br />
Outside<br />
Diameter<br />
Tolerance<br />
(ISO 5252)<br />
D2<br />
D3 1 or D4 1<br />
D1<br />
Notes<br />
1 May be specified in special cases.<br />
- Additional cut length tolerances are as follows:<br />
For OD 114.3<br />
1 or D41 T41 ±1.0% max,<br />
±3 mm<br />
T3<br />
❍ DIN 17457 ‘Welded circular austenitic stainless<br />
steel tubes subject to special requirements’.<br />
❍ DIN 17458 ‘Seamless circular austenitic stainless<br />
steel tubes subject to special requirements’.<br />
5-17