Ansoft Q3D Extractor

More documents

Recommendations

Info

The Ansoft Solution: Ansoft Q2D Extractor � To determine the if the differential impedance of this these traces is 100 Ohms, Joe will set up and run the nominal problem. Even though he is optimistic about obtaining 100 Ohm differential impedance from an off-theshelf package, he only wants to set up the problem once. If the package traces don’t yield the desired differential impedance he can parameterize the model to study the effect of varying trace separation and trace width
The Ansoft Solution: Ansoft 2D Extractor �The nominal case yields a differential impedance of 97.4 ohms, it’s close but the parametric sweep will predict which values will be needed to achieve exactly 100 ohm differential impedance
Page 1 and 2: High-Performance High Performance P
Page 3 and 4: The Scenario � A big ASIC design
Page 5 and 6: ~~ ~~ ~~ ~~ ~~~~ ~~~~ ~~ ~~ Joe Eng
Page 7 and 8: The Tools Needed to Perform � Joe
Page 9: The Ansoft Solution: Ansoft Q2D Ext
Page 13 and 14: The Ansoft Solution � Joe has com
Page 15 and 16: The Ansoft Solution: Return Path
Page 17 and 18: The Ansoft Solution: Ansoft Optimet
Page 19 and 20: The Ansoft Solution: Ansoft Optimet
Page 21 and 22: The Ansoft Solution: Ansoft Q3D Ext
Page 27 and 28: The Ansoft Solution: Ansoft TPA 4.0
Page 29 and 30: Ansoft Q3D Extractor � After the

Ansoft Q3D Extractor

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?