true grip non slip additive - MSDS

More documents

Recommendations

Info

Safety Data Sheet 5. FIRE FIGHTING MEASURES Hazards from combustion products: Non-combustible material. Precautions for fire fighters and special protective equipment: Non-combustible material. Suitable Extinguishing Media: Not combustible, however, if material is involved in a fire use: Media applicable to surrounding fire. 6. ACCIDENTAL RELEASE MEASURES Methods and materials for containment and clean up: Wear protective equipment to prevent skin and eye contact and breathing in dust. Work up wind or increase ventilation. Cover with damp absorbent (inert material, sand or soil). Sweep or vacuum up, but avoid generating dust. Collect and seal in properly labelled containers or drums for disposal. 7. HANDLING AND STORAGE Conditions for safe storage: Store under cover in a dry place. Keep containers closed when not in use - check regularly for spills. Precautions for safe handling: Avoid skin and eye contact and breathing in dust. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Occupational Exposure Limits: No value assigned for this specific material by the National Occupational Health and Safety Commission. However, Exposure Standard(s) for constituent(s): Dusts not otherwise classified: 8hr TWA = 10 mg/m 3 As published by the National Occupational Health and Safety Commission. TWA - The time-weighted average airborne concentration over an eight-hour working day, for a five-day working week over an entire working life. These Exposure Standards are guides to be used in the control of occupational health hazards. All atmospheric contamination should be kept to as low a level as is workable. These exposure standards should not be used as fine dividing lines between safe and dangerous concentrations of chemicals. They are not a measure of relative toxicity. Engineering controls: Avoid generating and breathing in dusts. Use in well ventilated areas. Keep containers closed when not in use. Product Name: N9568639-UNIT TRUE GRIP NON SLIP Issued: 06/04/2009 ADDITIVE Substance No: 000014094801 Version: 2 Page 2 of 5
Safety Data Sheet Personal Protective Equipment: The selection of PPE is dependant on a detailed risk assessment. The risk assessment should consider the work situation, the physical form of the chemical, the handling methods, and environmental factors. Personal Protection: E - OVERALLS, SAFETY SHOES, SAFETY GLASSES, GLOVES, DUST MASK. Wear overalls, safety glasses and impervious gloves. Avoid generating and inhaling dusts. If excessive dust exists, wear dust mask/respirator meeting the requirements of AS/NZS 1715 and AS/NZS 1716. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state: Powder Colour: Grey Odour: Odourless Solubility: Insoluble in water. Specific Gravity: 2.4 Relative Vapour Density (air=1): N App Vapour Pressure (20 °C): N App Flash Point (°C): N App Flammability Limits (%): N App Autoignition Temperature (°C): N App % Volatile by Weight: N Av Solubility in water (g/L): Negligible Melting Point/Range (°C): N Av Boiling Point/Range (°C): N App Decomposition Point (°C): N Av pH: N App Viscosity: N App Evaporation Rate: N App 10. STABILITY AND REACTIVITY Chemical stability: Stable under normal conditions of use. Conditions to avoid: Avoid exposure to moisture. Incompatible materials: None known. Hazardous decomposition products: Not known. Hazardous reactions: None known. Product Name: N9568639-UNIT TRUE GRIP NON SLIP Issued: 06/04/2009 ADDITIVE Substance No: 000014094801 Version: 2 Page 3 of 5
Page 1: Safety Data Sheet 1. IDENTIFICATION
Page 5: Safety Data Sheet Poisons Schedule:

true grip non slip additive - MSDS

Create successful ePaper yourself

Delete template?

Save as template?