Shark - Home Depot
Shark - Home Depot
Shark - Home Depot
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Getting Started: Vacuum and Steam Panel<br />
The Vac-Then-Steam has two<br />
operating modes: 1<br />
1<br />
VACUUM MODE:<br />
DO NOT USE STEAM PAD AND<br />
FRAME IN VACUUM MODE<br />
2<br />
3<br />
OPERATING IN VACUUM MODE:<br />
1 Remove steam pad and frame,<br />
if attached. See page 8 for<br />
instructions. Vacuum will not activate<br />
if steam frame is attached.<br />
2 SLIDE THE TOGGLE SWITCH UP to<br />
expose the vacuum power button.<br />
3 Press the VACUUM POWER BUTTON<br />
to the ON “I” position to activate<br />
the vacuum.<br />
4 TOLL FREE: 1-800-798-7398<br />
2<br />
3<br />
STEAM MODE:<br />
OPERATING IN STEAM MODE:<br />
1 Attach steam pad and frame.<br />
Steam mode will not work if the pad<br />
and frame are NOT attached. See<br />
page 8 for assembly instructions.<br />
2 Fill the water tank.<br />
SLIDE THE TOGGLE SWITCH DOWN<br />
to expose the Steam Power button<br />
3 Press the STEAM POWER BUTTON<br />
to the ON “I” position. The button<br />
will be illuminated red when steam<br />
mode is activated.<br />
4 Wait 30 seconds to heat water, then<br />
TILT HANDLE BACK TO ACTIVATE<br />
STEAM PUMP.<br />
MV2010_11_IB_ENG_110103.indd 4 11-01-03 1:26 PM
Change language