EU Product Catalog - psm-muenchen.de

More documents

Recommendations

Info

Page 14 DELTA REGIS Tools Inc. DRTS Series Torque Test System Verify the torque of your Electric and Pneumatic Screwdrivers where it counts - directly on the application! Take the guesswork out of your calibration using the DRTS Torque Test System. • Everything you need to set or verify torque values is included with the DRTS system, housed in a protective carrying case. • Set the tool directly on your application - avoid the complexities of simulating joint types on off-line bench torque testers. • Simply remove the bit from your screwdriver and install the DRTX torque sensor between the bit and the screwdriver. Hook up the DRTM torque meter to the sensor, set the parameters with the included instructions, and take sample readings while you run the tool directly on the job. • The rugged design of the DRTS System makes it ideal for lab, manufacturing, life cycle test, and quality audit applications. Accessories Optional Signal Cables DRTM39001-1 (1m) DRTM39001-3 (3m) DRTM39001-10 (10m) RS-232 Data Cables DRTM9103-1 (1m) DRTM9103-2 (2m) DRTM9103-3 (3m) Model Numbers Max. Capacity Each DRTS Torque Test System includes: ASSEMBLY TOOLS TORQUE MEASUREMENT SYSTEMS System Model No. Nm in.lbs Drive Size Includes Sensor model DRTS3-02 2 20 1/4 hex DRTX3200-02 DRTS3-05 5 50 1/4 hex DRTX3200-05 DRTS3-10 10 100 1/4 hex DRTX3200-10 DRTM-20 Torque Meter with DRTM3901-01 AC Adaptor The DRTM-20 automatically identifies the DRTX torque sensor for easy set-up. The available ‘verify’ mode provides accept/reject indication based on user-set hi and low torque limits. The AC adaptor charges the DRTM’s six NiMh batteries - a full charge renders approx. 8 hours of use. DRTX Torque Sensor The DRTX sensor utilizes magnetolastic, non-contact sensor technology. It is suited for use with shut-off clutch, slip clutch, and stall type pneumatic and electric drivers, as well as pulse tools. DRTM39001-2 Signal Cable The included 2 meter (6.5 ft) cable transfers the power and signals between the DRTM-20 torque meter and the DRTX torque sensor. Carrying Case Foam lined, high impact plastic carrying case protects and stores the DRTS System Delta Regis Tools, Inc. 3315 Industrial 25th Street, Fort Pierce, FL 34946 T: (888) 500-2755 or (772) 465-4302 F: (866) 500-7270 or (772) 465-4368 www.deltaregis.com
Specifications DRTM-20 Torque Monitor Specifications Characteristic Specification Excitation Voltage 5 volts Display LCD display Resolution 3.5 digits Accuracy 0.5% FS Signal to Noise Ratio 82 dB Memories 100 Controls Six button keypad: Back; Forward; Mode; Clear/ Zero; On/Off; Enter Tracking, Positive Peak, Negative Peak, High Limit, Modes Low Limit, Verify, Data Display, Systems Options, Systems Submenu “Units”, Filter, Timeout, Sense Filters 400 Hz, 800 Hz, 1600 Hz, 3000 Hz Output (standard) 15 pin RS232 Output (optional) Analog signal, Accept/Reject contact closure, 200V peak resistive, 0.5 A make/break, 1 A continuous Adapter / Charger 115V Batteries 6 AA NiMh (IMPORTANT! Only use NiMh batteries) Battery Life 8 hours Full Charge Time 2 hours Dimensions 4.25”W x 7.5”H x 2.25”D Weight 1.6 lbs Hex Drive Model 1/4” Hex Inches /Millimeters A B C D E F G H I 3.98 / 101.09 Hex Drive Sensor Dimensions 2.84 / 72.14 1.88 / 47.75 0.91 / 23.11 1.64 / 41.66 Note: All product information is subject to change 0.82 / 20.83 1.22 / 30.99 0.68 / 17.27 DRTX-Series Torque Sensor Specifications Characteristic Specification Power Requirement 5 volts, regulated Current Draw 15 mA Torque Signal output 0.5 to 4.5 VDC Non Linearity < 0.50% FS Repeatability < 0.25% FS Hysteresis < 0.50% FS Frequency Response 10,000 Hz, minimum Rotational Speed 5000 Continuous; 10,000 RPM Intermittent Overload Capacity 150% FS Resistance to Magnetic Fields 400 Gauss minimum Operating Range -10 to 70 deg.C Temperature Effects on Zero and Output +/- 0.04% FS / deg. C Insulation to Ground > 100,000 M ohms Side Load / Bending Error < 0.001% FS Rotational Effect on Output < 0.5% Full Scale Rotational Effect on Output (2 Nm sensor) < 1% Full Scale Delta Regis Tools, Inc. 3315 Industrial 25th Street, Fort Pierce, FL 34946 T: (888) 500-2755 or (772) 465-4302 F: (866) 500-7270 or (772) 465-4368 www.deltaregis.com 2.55 / 64.77 Page 15
Page 1: DELTA REGIS Tools Inc. ASSEMBLY TOO
Page 4 and 5: Page 4 DELTA REGIS Tools Inc. 300 S
Page 10 and 11: Page 10 DELTA REGIS Tools Inc. ASSE
Page 12 and 13: Page 12 DELTA REGIS Tools Inc. DRFF
Page 16: DELTA REGIS Europe GmbH Fraunhofers

EU Product Catalog - psm-muenchen.de

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?