Roadway & Traffic Signal Posts - ANTIQUE Street Lamps

How to Use this Selection Guide
The posts in this selection guide are grouped by product families. Each post consist of a decorative
base as designated by the Post Series name. Only a small sampling of the possible combinations
of these products and accessories are shown in this guide.
The infinite possible combinations of these products require the specifier to provide Antique Street
Lamps, Inc. with specific information for each post. The product family, material, shaft style, height,
and accessories, along with the local structural code and wind condition must be furnished. The
forms for specifying this information are provided on pages 19 and 20 of this guide.
Antique Street Lamps can then provide product drawings, base and shaft sizes, technical specifications,
and ordering information for your project.
Illustrated below is how to use this selection guide.
Scale: .25"=12"
Pg. PR-19
Part #
page
no.
BHC90/2
CR-4
24"Oct. 24"Oct.
2BH27/EVR32
LR-1
BHC45/1
CR-4
BRF
A-3
BH27/EVR32
LR-1
Cover Photo: AVENUE OF THE ARTS
South Broad Street, Philadelphia, Pennsylvania
22"Oct.
2LAM30
L-9
C30
C-4
BANGOR Series
Roadway & Traffic Signal Post
(Clam-Shell Style Bases)
Selection Guide
22"Oct.
LAM30
L-9
For Specifications of the se and other parts, see page numbers located behind corresponding tabs "Post Top
Luminaires","Roadway & Pendant Luminaires", "Post Top Crossarms", "Roadway Arms", "Signage", or "Acce sso rie s". For othe r
Luminaire and Arm cho ices, see indexes located behnd corresponding catalog tabs.
Post with Clam-Shell Bases
The post shall consist of a shaft with an integral anchor base plate. The base shall be a decorative, two-piece base, which fastens
to ge the r aro und the po st. For S haft Optio ns and fo r S haft and B ase Specification Information, see back page of this selection guide.
SPECIFICATION INFORMATION .
BRF/LTD
A-3
To provide complete specifications for your project, including the guage and diameter of the post shaft, the size
of the base (determined by the shaft dia.) and the anchor bolt size, the following information is required.
• Local Structural Code
• Local Wind Conditio n
• Shaft Type (material, and shape)
• Base Series (ASL series name, and material)
Roadway Lighting Post
post height
ANTIQUE Street Lamps, Inc.
ASL Banner Arm
qty., part # ,
orientation
Banner or Sign
qty., PA, weight.
ASL Arm
part #
ASL Luminaire
qty., part #
Sign
weight, PA, orientation
ASL Shaft
shape option, material (steel
or aluminum)
ASL Base
ASL Series name, material
(cast iron or aluminum)
• Equipment mounte d to Po st
• Width x Length (Projected Area)
• Weight
• Location (height and orientation)
Stuctural
Code: .
Wind
Condition: mph.
Use this guide to determine
equipment orientation on the post.
28"Oct.
ANTIQUE
Street Lamps, Inc.
P.O. Box 15029 Austin, Tx. 78715-0279
(512) 295-3585 Fax (512) 295-3330
SHAFT SHAPE OPTIONS (Cross Sections)
All shafts are tapered to
0.14 inch per foot of
length. The shafts are
available in steel and
aluminum, in various wall
thicknesses (gauges).
Round
P.O. Box 150279 Austin, Tx. 78715-0279 (512) 295-3585 Fax (512) 295-3330
270°
16 Flute
OctaFlute
OR IENT AT ION GUIDE
225°
315°
180°
0°
12 Flat Flute
Octagonal
135°
Anchor
s
90°
45°
Handhole
Pg. PR-2
■
■
■
■
■
Name of Post Series
Part Number &
Specification Page Number
(located behind the corresponding
tab in the catalog)
Select desired Post Series Style
Select desired Arm, Luminaire, Finials,
Banner Arms, Traffic Signal Arm Style or other
Accessories.
(These can be selected from other pages in this
guide or from indexes behind tabs in the catalog)
Specification Information,
pages 19 & 20 (back of guide)
Shaft Shape Options
See pages 19 & 20 at the back of the guide:
Select desired Shaft Shape
Send ANTIQUE Street Lamps complete information
as requested on these two pages.
The diameter and gauge of the Shaft, and the
size of the Base, can be determined with this
information. The Technical Specifications and
Ordering Information for your post will then be
provided by the factory.
Urban Planners: Kise, Franks, and Straw, Inc.
Lighting Designers: Grenald Waldren Associates