Preliminary Information AP4807 – 4-in-1 Mifare® reader with ...

Cost effective remote maintenance
A convenient maintenance software
application not only allows for a quick
overview of the total configuration
with all components and status
messages, but even so for fast
remote modification of system
parameters. This also clearly reduces
the costs in comparison to those
related to traditional and (travel)
intensive effort by engineers on-site.
Schematic overview:
Freedom of choice
You can use any Mifare card
available on the market or Nedap’s
Combi Card.
Through its on-card dual system of
Nedap’s UniXS chip and a Mifare
chip, the Nedap Combi Card offers
optimal ease of use during the
broadest of applications, when
different card technologies are used
within the organization.
Mifare design antenna
For using the Mifare technology in a
secure way, Nedap developed a
special Mifare antenna, the
Reflex130M.
Technical Specifications AP4807 Article#: on request
Reading distance Depending on applied card and cabling distance
Housing Metal enclosure with plastic side panels suited for wall mounting
Dimensions 75 x 410 x 240 mm. (Height x length x Width)
Weight ~4,3 kg
Temperature Operational temp: 0 – 55°C; storage: -30 – 65°C; (10-93% non condensing)
Cabling
Cards
TCP/IP network AEbus, max. 1000m
IN/
OUT
AEbus,
1000m with AX4000, use of AP4xxx only, isolated AEbus, 2 x 2 x 0.5mm 2 shielded
300m with AX4000, with mixed AEpacks, isolated AEbus, 2 x 2 x 0.5mm 2 shielded
5m with AX4000, mixed AEpacks, AEbus non isolated, 2 x 2 x 0.5mm 2 shielded
Contacts and sensors: 100m, 3 x 0.25mm 2
Nedap Reflex130M Mifare antenna, RG58U coax, up to 35m.
Per AP4807 a maximum of 16 doors and 5.000 badges, which may be authorized
differently over the 16 doors, can be applied. The applied badge type, number of identifiers
in the system and number of authorizations may influence this.
Inputs 8, monitored, software selectable, intended for dry contacts
Outputs 4, dry contacts NO/NC/COM, can be monitored via software
Power supply 10-35VDC, 10-25VAC, external
Installation See Installation Guide AP4807
Please note:
Hardware and Software components are constantly being developed. The hardware functionality of the AEpacks is being handled by local software.
You are advised to verify the required hardware functions versus availability of the corresponding software during the planning phase.
IN/
OUT
IN/
OUT
Changes without prior notice; © Nedap N.V., IDEAS, P.O Box 103 NL-7140 AC GROENLO, The Netherlands, v3.91