VPL-SW500/SX500 Series
VPL-SW500/SX500 Series
VPL-SW500/SX500 Series
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Interactive Function<br />
The Interactive function of the <strong>VPL</strong>-SW535C and <strong>VPL</strong>-SW525C<br />
allows presentation files to be controlled using an interactive<br />
pen. In addition, two users can draw concurrently on the<br />
projection surface using dual interactive pens.<br />
File control by interactive pen Dual-pen<br />
Installation Advantages<br />
The <strong>VPL</strong>-<strong>SW500</strong>/<strong>SX500</strong> <strong>Series</strong> projectors are equipped with an<br />
optical zoom and lens shift capability. Using this function, the<br />
position of the projected image can be easily adjusted to the<br />
desired settings during installation. This greatly reduces the time<br />
and hassle of fine-tuning the image position without having to<br />
physically move the projector or sacrifice image quality.<br />
“Blend-in” Design<br />
The <strong>VPL</strong>-<strong>SW500</strong>/<strong>SX500</strong> <strong>Series</strong> projectors showcase a new lowprofile<br />
chassis, so these projectors appear to blend into the<br />
ceiling or wall on which they are mounted.<br />
Good TCO, Energy-efficient Design<br />
Auto Power Saving Function<br />
•Auto Mode (Auto Brightness Adjustment Function)<br />
The brightness of the lamp’s output is automatically<br />
adjusted depending on the brightness of the projected<br />
image, to avoid unnecessary power consumption.<br />
When showing darker images that don’t require high<br />
brightness, lamp output decreases.<br />
Lamp drive<br />
High<br />
Simulated images<br />
•Lamp Dimming Function<br />
The <strong>VPL</strong>-<strong>SW500</strong>/<strong>SX500</strong> <strong>Series</strong> projectors are equipped with a<br />
lamp dimming function. After 10 seconds of a static signal<br />
feed, the lamp dims by approximate 15% which is hardly<br />
noticeable.<br />
If one of these projectors is left powered on while not in<br />
use, after a set period of time it will automatically detect<br />
no change of signal input and will dim the lamp to as low<br />
as approximate 30% of original brightness to significantly<br />
reduce energy consumption.<br />
Input (image)<br />
Lamp power*<br />
A B B B C<br />
100%<br />
85%<br />
(-15%) Automatically<br />
Slowly<br />
Automatically<br />
Lamp dimming<br />
Slowly Quickly<br />
(Restart)<br />
30%<br />
(-70%)<br />
In use<br />
0 sec. 10 sec. 5/10/15/20 min.<br />
Lamp dimming scheme<br />
•Blank (Picture Muting)<br />
The <strong>VPL</strong>-<strong>SW500</strong>/<strong>SX500</strong> <strong>Series</strong> projectors can<br />
temporarily disable video signal output. This<br />
function can be easily operated with just the<br />
touch of a button on the supplied Remote<br />
Commander unit. In addition, this function<br />
allows blank image projection with low power<br />
consumption using lamp control technology.<br />
Example of<br />
class room<br />
Lamp Drive<br />
Normal<br />
condition<br />
(100%)<br />
Not in use<br />
Time<br />
Class time Recess time Class time<br />
Projection Blank Projection<br />
Quick restart<br />
In use<br />
Lamp 30% with blank image<br />
The values are approximate.<br />
Energy Saving Design<br />
The <strong>VPL</strong>-<strong>SW500</strong>/<strong>SX500</strong> <strong>Series</strong> projectors offer remarkably<br />
low power consumption, allowing users to make significant<br />
savings on their electricity expenses.<br />
ECO MODE Key<br />
With a single push of the ECO MODE key on either the<br />
projector or the supplied Remote Commander unit, users can<br />
select an energy-saving setting from the ECO Mode menu.<br />
Long-lasting Lamp<br />
By incorporating a high-performance lamp and advanced<br />
lamp-control technology, the <strong>VPL</strong>-<strong>SW500</strong>/<strong>SX500</strong> <strong>Series</strong><br />
projectors deliver an extremely long lamp replacement time<br />
of 6,000 hours.*<br />
* Approximate recommended period, in low mode.<br />
3