Prestige P2000 & Matisse M2000 Technical Catalogue - Clipsal

FLUSH SWITCHES
16
Flush Switches
Prestige P2000 Series Flush Switches are manufactured in accordance with AS/NZS3100, AS/NZS3133 and
other relevant Australian Standards, and comply with all relevant Wiring Rules and Electrical Supply Authorities
requirements. In addition, Prestige P2000 Series Flush Switches have passed extensive tests conducted in our own
test laboratories. These tests include thousands of operations under overload conditions, tests with fl uorescent,
capacitive and inductive loads and tests with direct currents.
Terminal screws conveniently face the same direction and are ‘backed off’ for simple cable insertion. All models have a
base projection of 15mm.
Note: Vertical switches can be converted to horizontal mounting by removing the switch mechanism and rotating it 90°.
STANDARD SIZE FLUSH SWITCHES - VERTICALLY MOUNTED
Cat. No. Length Width Depth Mounting Centres
All Products 116mm 73mm 28mm 84mm apart
P2031VA A
P2031VA15 A
P2032VA B
* Refer to Page 27 for mounting templates.
1 Gang Switch, 10A/250V, 1 way/2 way - mechanism has 5 terminals, 1 and 2 way
switch terminals accommodate 4 x 1.5mm² cables. Common, Earth and Looping
terminals accommodate 4 x 2.5mm² cables (Approval No. is S/1/P30M).
1 Gang Switch, 15A/250V, 1 way/2 way - mechanism has 5 terminals. 1 and 2 way
switch terminals accommodate 4 x 1.5mm² cables. Common, Earth and Looping
terminals accommodate 4 x 2.5mm² cables (Approval No. is S/1/P30M15).
2 Gang Switch, 10A/250V, 1 way/2 way - mechanism has 5 terminals. 1 and 2 way
switch terminals accommodate 4 x 1.5mm² cables. Common, Earth and Looping
terminals accommodate 4 x 2.5mm² cables (Approval No. is S/1/P30M).
A
B