Jet 7 - Fael

62
Technical features of Jet 7
Aiming Description
400W CL II
YES
NO
360°
YES
CHARACTERISTICS
• Body and frame in die cast aluminium with primary
alloy and low copper content with an high
weather proof rating, coated with polyester powders
in black colour, complete with thermally isolated
control gear housing. For insulation Class II
fixture only in silver colour.
• Reflector made of highly pure alluminium sheet,
polished and oxidized. Tempered glass with silicon
rubber gasket.
• Bracket made of galvanized steel with index for
vertical orientation.
• The removable control gear plate, made out for
insulation Class I of a galvanized steel sheet, and
for insulation Class II of injection of selfextinguish
thermoplastic material, is complete with
connectors which allow its quick disassembly
during maintenance operations.
• Electrical housing cover made of technopolymer.
• Lampholder E 40, cable gland PG 13,5.
All the electrical components are produced
according to the Italian Quality Standards for
power 230V - 50 Hz and the projector is manufactured
according to EN 60598/1 rules.silver colour.
LAMPS
MT (JM-T) 250 - 400W E40
ST (SAP-T) 250 - 400W E40
OPTICAL SYSTEM
• The symmetrical versions with two different
reflectors (peened and specular) and the large
range of lamps which may be used, guarantee
medium - wide and medium narrow beams.
The accuracy of these reflectors enables a perfect
control of the luminous flux and a considerable
glare reduction.
The flux reflecting skirt ensures high performances.
• The asymmetrical optics, obtained with careful
laboratory tests, ensures a perfect control of the
luminous flux,with a considerable improvment in
the projector's performance and glare reduction.
• The circular projector is supplied with 2 types of
optics:
- Glazed with medium - narrow beam.
- Super bright with narrow beam at highest
intensity.
The baffle avoids the direct glare of the lamp.
Operating area: relief lighting, sport courts
Wind exposed surface = 0,193 m 2
COLOURS
Silver Black White