Industrial Gas Catalogue- Section 6-13 - All Controls
Industrial Gas Catalogue- Section 6-13 - All Controls
Industrial Gas Catalogue- Section 6-13 - All Controls
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ALL CONTROLS<br />
MANOMETERS MANOMETERS cont...<br />
cont...<br />
083SE0200N<br />
Ph: (08) 9277 4299 Fax: (08) 9277 5824<br />
www.allcontrols.com.au<br />
DIGITAL MANOMETER - MDZ BI - SEITRON<br />
Comes With<br />
Large LCD display (4 Digits)<br />
Auto Shut Off<br />
Dual Scales: LCD & Indexed<br />
Low Battery Function<br />
Very Affordable<br />
9VDC Operation<br />
Choice of 5 units of measurement<br />
Range of 0 - 10 kPa<br />
Over range alarm<br />
Hold reading function<br />
Synthetic leather case<br />
2 - Plastic pipes<br />
6 x 1.5VDC batteries<br />
Silicon tubing<br />
PRESSURE PRESSURE TEST TEST POINTS<br />
POINTS<br />
083G099*<br />
083G0992<br />
083G0993<br />
083G0992A<br />
TEST POINT BRASS - 1/8” BSP & 1/4” BSP<br />
Screwed needle seal<br />
Orifice: 0.7 mm to meet AGA standards<br />
Pete’s Plugs will allow you to take pressure or<br />
temperature readings quickly and eliminate the<br />
need for leaving costly gauges or temperature<br />
indicators in the line.<br />
PETE’S PLUG - 1/4” BSP<br />
Brass Bodied<br />
PETE’S PLUG GAUGE ADAPTOR<br />
N.B. the pressure gauge adaptor has a probe made<br />
of 304 stainless steel. The probe is 1/8” in diameter<br />
and extends two inches on the standard adaptor.<br />
ADAPTOR 1/8” x 1/4” BSP BRASS<br />
To suit G0993<br />
7 - 2