ATS-2 Basic Extensions.vp

Chapter 24 Digital Input/Output ATS2.Dio.JitterReady
Example See example for ATS2.Dio.InJitterBW.
ATS2.Dio.JitterReady
Syntax ATS2.Dio.JitterReady
Data Type Integer
0 Reading not ready.
>0 Reading ready.
Property
Description This command returns the Digital Input/Output Interface Jitter meter
meter settled reading ready count.
Because readings do not return until a reading is ready, this
command may be used to avoid waiting for a reading. This
command does NOT zero the ready count and so may be called any
number of times. Only a call to the ATS2.Dio.JitterRdg or
ATS2.Dio.JitterTrig commands will zero the ready count.
If the reading is found to be ready, a call to the
ATS2.Dio.JitterRdg command will be guaranteed to return
quickly.
See Also ATS2.Dio.JitterRdg, ATS2.Dio.JitterSettling,
ATS2.Dio.JitterTrig
Example See example for ATS2.Dio.InJitterBW.
ATS2.Dio.JitterSettling
Method
Syntax ATS2.Dio.JitterSettling(ByVal Tolerance As
Double, ByVal Floor As Double, ByVal FloorUnit
As String, ByVal Points As Integer, ByVal Delay
As Double, ByVal Algorithm As Constant)
Parameter See Appendix A for Settling Algorithm and parameter name
descriptions.
Description This command sets the settling parameters for the
ATS2.Dio.JitterRdg command.
Page 24-12 AP Basic Extensions for ATS-2