Mixer - FLEX

Mixer
Mixing is not always mixing.
It has to be compact. It has to be robust. It has to be protected from dirt and
damage. Feature a lot of torque. Be comfortable to hold.
Many years of experience and intensive cooperation with the professionals in the
field have flown into the FLEX mixing machine and mixing head program.
The motor, the cooling, and the gears have been designed for tough, continuous
operation lasting for hours.
And the mixing heads made of powder-coated, high-quality metal feature stable
weld joints, burr-free edges, and circumferential protection rings. Robust quality
for professional practitioners.
What is to be taken notice of?
Thorough blending of the various materials commonly mixed today prevents
construction damage and costly consequential charges. That is why several basic
rules must be observed.
Viscous and heavy materials overstrains drills. Use specially constructed mixing
machines, with optimised speeds and power transmission.
When selecting the mixer observe the direction of flow: Pulverized material from
bottom to top, thin liquid materials from top to bottom or mix with parallel
direction of flow. At immersion a reduced speed prevents spraying. FLEX mixing
machines with accelerator trigger switches permit the gradual acceleration to
the required speed. Air pockets are minimised by the complete immersion of the
mixing head.
For your safety you should wear protective goggles and possibly a dust mask.
Never mix solvents with a flashpoint below 21°C. Observe the processing and
safety instructions of the material or machine manufacturers.