Polisher - FLEX
Polisher - FLEX
Polisher - FLEX
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
hh<br />
The new POLISH<strong>FLEX</strong> PE 14-2 150 was developed<br />
by professionals for professionals.<br />
POLISH<strong>FLEX</strong><br />
The new POLISH<strong>FLEX</strong> is perfectly adapted to user requirements. Motor and gear unit both operate extremely quietly. The optimum<br />
speed range of 380-2100/min and the high torque are ideally suited for processing sensitive surfaces. Thanks to the ergonomic<br />
design and low weight, even difficult areas can be easily reached and processed. The maximum polishing pad diameter is Ø 200 mm<br />
enabling horizontal and vertical surfaces to be processed quickly and comfortably.<br />
The gear unit of the POLISH<strong>FLEX</strong> is an innovative combination<br />
of planetary and lapped angular gear units. Planetary gear<br />
units can transmit very high torques despite their very compact<br />
design. Extremely low noise generation thanks to sound<br />
optimization, even under load.<br />
Continuous speed control trigger: for a<br />
gentle start, starting speed at Setting 1<br />
(380rpm) and a lock-on for continuous<br />
operation<br />
Microprocessor electronics with stepless<br />
380- 2100/min speed preselection.<br />
The machine has a flat gear head to keep the distance<br />
from the surface as small as possible. The machine can<br />
therefore be operated safely in any position. The grip<br />
hood with SoftGrip has been ergonomically designed for<br />
optimum and precise guidance. If required, a handle can<br />
be attached to the side (included as standard equipment).<br />
Powerful 1400 watt motor with highly efficient<br />
fan for optimum air flow. The optimized<br />
air ducting system ensures the best possible<br />
cooling of gear unit and motor. And there is no<br />
annoying exhaust air for the user.<br />
The spindle lock is ideally positioned to<br />
prevent operating errors and does not interfere<br />
with the grip area.<br />
5