Fendt Variotronic - AGCO GmbH

21
Standard and optional equipment
Positioning
GPS/GLONASS/GALILEO ready
Correction signals
EGNOS / WAAS
OmniSTAR VBS
OmniSTAR HP
Mobile reference station (RTK) 1)
Fixed reference station (RTK)
1), 2)
Correction data format
CMR
RTCM 2.3
RTCM 3.1
Correction signals via mobile network (Ntrip) 4)
Functions
Steering valves
Steering
Wayline offset
Marking of worked swaths
Marking of important positions (marker)
Ground speed
Tracking straight line
Tracking straight line A + angle
Tracking curves
Tracking circles
Adaptive curve mode
Automatic levelling
NMEA data output
Accuracy 3)
Pass-to-pass accuracy
n = standard/ ❑ =optional/ – = not available
VarioGuide Standard VarioGuide Precision VarioGuide RTK 1)
n
n
n
–
–
–
–
–
–
–
proportional
automatic
manual/automatic
n
n
0.2 - 25 km/h
n
n
n
n
n
n
n
+/- 20 cm
n
n
n
n
–
–
–
–
–
–
proportional
automatic
manual/automatic
n
n
0.2 - 25 km/h
n
n
n
n
n
n
n
+/- 5 cm
n
n
n
n
n
❑
n
n
n
n
proportional
automatic
manual/automatic
n
n
0.2 - 25 km/h
n
n
n
n
n
n
n
+/- 2 cm
1) Not available in all countries. Please contact your dealer for further information. Ntrip is available starting 3rd Quarter 2011.
2) Available 3rd Quarter 2011 within the scope of projects.
3) Notes on accuracy specifications: Static accuracy indicates how accurate the measured position of a stationary tractor is over a
longer period of time (usually 24 hours). The dynamic accuracy specifies the repeatable pass-to-pass accuracy that is attainable
within a 15-minute time frame. The specified values correspond to the maximum attainable system accuracy under optimum
conditions. The accuracy that can actually be attained in practice depends on various factors. AGCO is not responsible for availability
or for reduced accuracy caused by operational degradation, ionospheric or tropospheric conditions or satellite geometry.
AGCO is not liable for the performance data of the positioning systems (e.g. GPS, Glonass, Galileo) or the secondary systems
(e.g. EGNOS, WAAS, OmniSTAR, etc.).
4) SIM card not included in scope of delivery
GPS signal
+ Correction signal (e.g. type, accuracy, availability)
+ System and tractor factors (e.g. calibration, tyre pressure, front axle load
+ Implement factors (e.g. settings, horizontal draft, symmetry)
+ Conditions in the field (e.g. type of soil, conditions of ground, slope)
= real accuracy of VarioGuide in the field