Handbook of the Lewis Machine Gun (1917 cal 30).pdf - Forgotten ...

U >
"
U>
c-
POSITION OF
CH ARGIN G HANDL E
Third Position-Continued.
Third Position-Continued.
S T 0 PP AGE 8-Continued
REMECY
working parts ; if any roughness
on striker post or cam slot
in bolt, change them.
PROBABLE CAUSE
2. If on pulling back handle I Weak or broken
there is little or no resistance, mainspring.
if main spring is lig ht, tighten;
if broken, change.
3. If an empty case is in chamber
or ejection opening, take
off magazine, draw back c harging
ha ndle, and unload witho
ut firing.
Lf empty case is in chamber,
force out with cleaning rod
from muzzle end.
If there are no signs of extractors,
or only one extractor
gripping it , change bolt;
otherwise continue firing .
4. If stoppage recurs, examine
extractor, exchange whichever
is faulty .
5. If charging handle cannot
be moved, remove magazine.
lf charging handle Aies f o rward,
change magazine.
6. If on· removing magazine,
charging handle remains in
position as before-
(a) Help cartridge into corre ct
position on feed way.
(b) Test cartridge g uide spring.
(c) Test mainspring.
(a) Bad extractors.
(b) Hard extractio n.
(c) If empty case is
in receiver, weak
extractors or
broken ejector.
(a) Damaged magazine
jammed.
(b) Magaz ine not
properly on magazine
post.
(c) Broken maga ­
zine catch spring.
(d) Broken or damaged
magazine
spacer ring causing
it to jam.
(a) Weak or broken
c a rtrid ge guide
spring.
(b) Too weak mainspring.
(c) Too much gas.
PREPARATION FOR
INSTRUCTION
On Rang