Door Pulls - FSB

More documents

Recommendations

Info

FSB’s Threaded Insert Fixing Method Step One Whether a manual or a power drill is used, threaded inserts require holes 12.5 mm in diameter to be drilled. 62 Step Two Then the threaded insert is screwed in using a size 8 Allen key until the washer at the end of the threaded insert lies flush against the stile. FSB recommends an Allen key with handle, as this is the best way of guaranteeing the requisite force is exerted. FSB’s threaded insert method is a practically-minded and, at the same time, enhanced means of fixing concealed pulls to solid doors, and in the process allowing distension forces to be absorbed far more effectively by the door stile. Regardless of door thickness or stile type, a single type of threaded insert 34 mm long is used. Step Three The “mounting post” is screwed into the threaded insert. The self-tapping thread creates an excellent bond with comparatively little play between door stile and threaded insert, thus ensuring an even and effective frictional connection – assuming the accurate drilling of 12.5 mmdiameter borehole has been made. Step Four The handle is then placed on the projecting “mounting post”.
FSB Clamping Rose Fastening mounting post FSB Clamping Rose Fastening The new FSB clamping rose fastening allows all FSB door pulls with round necks to be screwed tight against the surface of the door by means of an easy-to-operate clamping rose. Radial play allowed for by FSB ensures the necessary tolerances during fitting. Assembly is as follows: plastic washer steel washer Step One clamping rose First install the “mounting post”. How this is done depends on which fixing method you are using (back-to-back fixing, through-bolted fixing or concealed fixing). clamping element The FSB clamping rose fastening is a new method of assembling door-pulls whereby the pull is tightened fast against the surface of the door. Visible fixing screws are done away with. spacer sleeve Step Two Then detach the clamping elements from the end of the pull by turning them counterclockwise. Remove the plastic clip and slip the plastic washer, the steel washer, the clamping rose and the clamping element over the mounting post in that order. Using the spacer sleeve, screw the elements together, ensuring that the clamping rose and clamping element remain free to rotate. All door pulls with round necks are supplied as female parts with an internal left-handed thread 18 × 1.5 mm (M8 fixing) or 14 × 1.5 mm (M6 fixing). A clamping rose fastening comprises a plastic washer, a steel washer, a clamping element (with “lock-tight”), a rotating rose and a spacer sleeve that are securely held in place by a plastic clip and pre-attached to the end of the handle. Step Three Place the handle on the fixing points and tighten against the door by alternately turning the clamping roses in a clockwise direction. A turning device for the FSB clamping rose is supplied with the product. 63
Page 3 and 4:
Door Pulls & Glass Door Hardware No
Page 5 and 6:
Door Pulls & Glass Door Hardware Ab
Page 7 and 8:
New Products Hinges FSB introduces
Page 9 and 10:
Aluminum Stainless Steel 0105 Alumi
Page 11 and 12:
Pull Handles Oval Series FSB has de
Page 13 and 14: 6652 6653 Page 41 Page 42 6677, 668
Page 15 and 16: Pull Handles Round Series For detai
Page 19 and 20: Pull Handles Round Series L R 1 A 1
Page 21 and 22: Pull Handles Oval Series For detail
Page 27 and 28: Pull Handles For detailed informati
Page 37 and 38: Pull Handles Round Series L R 1 A 1
Page 39 and 40: Pull Handles Oval Series 4 Ø 40 4
Page 41 and 42: Fax Copy L R 1 A 1 R 2 L R 1 A 1 A
Page 55 and 56: Pull Handles Wave For detailed info
Page 57 and 58: Push and Pull Pad Handles The round
Page 59 and 60: Push and Pull Pad Handles Fixing ac
Page 61 and 62: Pull Handles 165 140 200 160 25 113
Page 63: Pull Handles Double-action swing do
Page 67 and 68: Fixing Methods Pull Handles Fixing
Page 69 and 70: Fixing Methods Pull Handles Fixing
Page 71 and 72: Fixing Methods Pull Handles Pull ha
Page 73 and 74: Fixing Methods Pull Handles Pull ha
Page 75 and 76: Overview 4220 41/51 Page 74 4223 45
Page 77 and 78: Strike Box for Twin-leaf Glass Door
Page 79 and 80: Strike Box for Twin-leaf Glass Door
Page 81 and 82: European Profile Cylinders (PZ) FSB
Page 83 and 84: Glass Door Locks Installation slamm
Page 85 and 86: Door Dimensions acc. DIN 18101 214,
Page 87 and 88: Technical Notes 4224 Series 29,3 29
Page 89 and 90: Frame Connection Dimensions HDL HDL
Page 91 and 92: Fixed Knobs for Glass Doors 55 80 6
Page 93 and 94: Pulls for Glass Doors 210 210 30 30
Page 95 and 96: Top Mounted System The high quality
Page 97 and 98: Floor Mounted System Product featur
show all

Door Pulls - FSB

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?