Recreational Dive Planner - Padi
Recreational Dive Planner - Padi
Recreational Dive Planner - Padi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Two<br />
Section 27<br />
sure group R (at the end of your first dive) to pressure<br />
group J (at the beginning of your second dive). Find<br />
pressure group R along the diagonal slope of Table 2<br />
and pressure group J along the bottom. Move in from<br />
pressure group R and up from pressure group J until<br />
you find the box where they intersect. There you find<br />
0:35 - 0:40 (Figure 13). Since you’re looking for the<br />
minimum surface interval, your answer is 0:35. You<br />
:<br />
PG SI PG<br />
PG<br />
15ft/5 m stop<br />
15ft/5 m stop<br />
Figure 12<br />
Your dive profile<br />
should now look<br />
like this.<br />
DEPTH<br />
BOTTOM TIME<br />
DEPTH<br />
BOTTOM TIME<br />
RNT<br />
+ ABT<br />
TBT<br />
must wait at least 35 minutes between the two dives<br />
that you planned in this example.<br />
Note that you’ve found the answer for dives planned<br />
to the limits. For conservation, in actually making the<br />
dives, dive for shorter times and/or allow a longer surface<br />
interval so you remain well within RDP limits.