tru boss series tru boss series - TRU Ball Release

T.R.U. BOSS SERIES
After shooting a Boss Series release, you will realize that it is the finest, most sensitive, and by far
the most accurate release made today. Settle into your anchor point and enjoy
knowing you’re holding the best money can buy!
The Choice of Today’s
Professionals!
Trigger
sensitivity
screw
Adjust Trigger or Remove
Teardrop to Fit Your
Hand!
Trigger
travel
screw
Swivel head and tighten
screws with #0 Phillips
screwdriver to adjust No-Tork
rotation preference
Trail
Boss
Release
Shown
Oil head periodically and keep release clean!
Never draw a bow to set release sensitivity!
Warning: Adjustment screw tightened too much in a
clockwise direction may cause premature firing.
Warning: Use Talon Head Only when shooting a small
rope loop on bowstring.
TOMORROW’S RESOURCES UNLIMITED
This product is guaranteed against defects in material
and workmanship not caused by normal wear. If you
experience any problem with this product, UPS ship to:
TRU, 131 Crennel Dr, Madison Heights, VA 24572 or
Mail to: TRU, P.O. Box 1180, Madison Heights, VA
24572. All returns must have a return authorization
number. You will receive top priority assistance. Call
(804) 929-2800 for authorization number. Packages will
not be accepted without return authorization number.
To Achieve Ultimate Performance:
1➤ Turn trigger sensitivity adjustment screw
counter-clockwise until screw is flush with
handle located on front side of index
finger position.
2➤ Turn trigger travel screw clockwise until
cocking mechanism will not hold, turn
screw 1/4 turn counter-clockwise making
sure cocking mechanism holds every
time.
3➤ Set sensitivity screw clockwise to your
desired sensitivity.
Patent # 5,937,842; Partial Pat. #5,685,286;
#5,715,805; #5,803,068
CHAPPY BOSS (TCBL-BK)
Talon Head/Black