technical data sheet - DiOLiN AG

Surface
The surface must be professionally preparated. Free of grease and solute particles
such as old coat, sanded grout or plaster. Not load-carrying surfaces must be well
hardend 1x with Diotrol Aqua Wallseal prior to application.
Drying
20 °C at 75%
rel. AH
Dry to handle according to temperature of environment and discharged air after 1
hour. Washable after 48 hours.
Cleaning of
Equipment
Immediately after use with brush cleaner followed by warm water adding rinsing
agent.
Painting drawing
Recommendation!
1x Wallfix Natura 5-10% diluted with water
1-2x Wallfix Natura according to opacity
On strongly absorbent surface a prime coat with DiOLiN Aqua Wallseal is needed
to ensure a good adhesion.
Security advice
none
Remarks
These specifications are in accordance with the latest status of technique and
serve as guideline and recommendation. We do not claim completeness for the
listed coat constructions and grounds. Due to the various grounds and terms of
practice, the user is not freed of his obligations, to proof our basic material in his
own responsibility for its applicability, based on the corresponding conditions of
the object and to manipulate it professionally. Oral construction recommendations
require a legally valid signed confirmation for its bindingness. By the releasing of
a new edition, this printed matter looses ist validity.
November 2012
DiOLiN AG | Bodenackerstrasse 64 | 4657 Dulliken | Tel:+41 (0)62 285 30 70
Fax: +41 (0)62 285 30 80 | www.diolin.ch