TILING TECHNOLOGIES - Bostik

Application
The soundness of the substrates should be checked prior to tiling applications.
No application should be performed on the substrates that are not strong enough to
bear their own weight.
Swollen, flaked-off, loose substrates and old damaged layers should be removed from
the surface before tiling applications. Cracks and gaps should be filled and levelled with
special repair mortars prior to application.
The subfloor should be primed with a suitable primer in compliance with the absorbency
and porosity of the floor.
Before the application, the powder material is poured into a clean container filled with
clean water (please refer to mixing water ratio for flooring screeds) and slowly mixed
with a low-speed mixer until obtaining a lump-free and homogenous mixture for
minimum 5 minutes.
The prepared mixture should be spread on the application surface slowly and on a
line of “S”.
Tiling Technologies
20
White Light Grey
Dark Grey Anthracite
Olive
Mint Green Crocus
Green
* These colour ranges are only for guidance and no perfect match is guaranteed with the original colour.