FLINTGLAS MS Cap Sheet CoolStar - MSDS - BuildSite.com

MSDS Number: CT -10118
CALIFORNIA SAFE DRINKING WATER AND TOXICS ENFORCEMENT ACT (PROPOSITION 65):
The following statement(s) are provided under the California Safe Drinking Water and Toxic
Enforcement Act of 1986 (Proposition 65):
WARNING!
This product contains a chemical known to the state of California to cause cancer and birth defects,
or other reproductive harm.
CANADIAN WHMIS INFORMATION:
GENERAL PRODUCT INFORMATION:
In Canada, these products are considered manufactured articles under the Workplace Hazardous Materials
Information System (WHMIS) and are exempt.
COMPONENT ANALYSIS - WHMIS IDL:
The following components are identified under the Canadian Hazardous Products Act Ingredient
Disclosure List:
• Silica, crystalline -
(14808-60-7) 20 to 40% 1 % (English Item 1406, French Item 1491)
quartz
ADDITIONAL REGULATORY INFORMATION:
GENERAL PRODUCT INFORMATION:
No information available for the product.
COMPONENT ANALYSIS – INVENTORY:
Component CAS # TSCA DSL EINECS
Asphalt 8052-42-4 Yes Yes Yes
Silica Crystalline Quartz 14808-60-7 Yes Yes Yes
Calcium carbonate 1317-65-3 Yes No Yes
Fiberglass mat, which is made from either: Continuous
filament fiber glass (encapsulated) or Fibrous glass
65997-17-3 Yes Yes Yes
Aluminum Hydroxide (CoolStar Coating) 21645-51-2 Yes Yes Yes
Titanium Dioxide (CoolStar Coating) 13463-67-7 Yes Yes Yes
SECTION 16 - OTHER INFORMATION
PREPARATION DATE: 1/1/2009
LAST REVISION DATE: 8/1/1994
DISCLAIMER: Reasonable care has been taken in the preparation of this information, but the supplier gives no
warranty of merchantability or of fitness for a particular purpose. Any product purchased is sold on the assumption
the purchaser will make his own tests to determine the quality and suitability of the product. Supplier expressly
disclaims any and all liability for incidental and/or consequential property damage arising out of the use of this
product. No information provided shall be deemed to be a recommendation to use any product in conflict with any
existing patent rights. Read the Material Safety Data Sheet before handling product.
Page 10 of 11