Characterization of Prepreg Materials for Wind Turbine ... - Hexcel.com

More documents

Recommendations

Info

Background Prepregs in Wind Energy
Typical Prepreg Systems in Wind Energy Typical resin systems M9G 310 J/g M9GF M19G UD Products 230 J/g 160 J/g Cure temperature ~100-120°C Carbon 500-600 g/m 2 Glass 1000-3000 g/m 2 Overall cure cycles ~4 to ~8 hours (optimisation is key) Typical prepregs high areal weight + moderate cure temperature + low reaction enthalpy 4 ©2013 Hexcel
Page 1 and 2: Characterization of Prepreg Materia
Page 3: Company Profile ‣ Technology lead
Page 7 and 8: Features of Typical Wind Turbine Bl
Page 9 and 10: Characterisation of a Shell Prepreg
Page 11 and 12: Conventional Shell Construction, wi
Page 13 and 14: XF2P: Surface Characterisation Lami
Page 15 and 16: XF2P: Cross-sectional Analysis Stan
Page 17 and 18: M79 New generation prepreg system f
Page 19 and 20: Reduction in Prepreg Exotherm, 1995
Page 21 and 22: M79: Example of Mechanical Test Dat
Page 23 and 24: Wind Blades: M79 co-cured in an Inf
Page 25 and 26: Conclusions ‣ Prepregs are used f

Characterization of Prepreg Materials for Wind Turbine ... - Hexcel.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?