Vanguard CT 7000 - HVTEST South Africa

More documents

Recommendations

Info

Graphic and Tabulated Printouts CT-7000 S2 Digital Circuit Breaker Analyzer EEPROM Stored Test Parameters ▼ ▼ Built-in Thermal Printer Output PC Printer Output ▼ H.V. TEST (PTY) LTD 3 Gaiety Ave, Robindale, Randburg, South Africa, 2010 Tel: +27(11) 782 1010 Fax: +27(11) 782 2770 P.O. Box 651287, Benmore, 2010 Email: sales@hvtest.co.za Website: www.hvtest.co.za
FEATURES • Full Breaker Tabulated & Graphic Data Printout • Built-in Thermal Printer • Initiate Breaker Operation • Digital Travel Transducer; No Setup or Calibration Required • Detect Main Contact and Insertion Resistor Contact on the Same Input Channel • On-Board Flash EEPROM Shot Storage • Diagnostic Capabilities • On-Board Flash EEPROM Test Plan Storage • Computer Interface TYPE PHYSICAL SPECIFICATIONS INPUT POWER DRY-CONTACT INPUTS TIMING WINDOWS TIMING RESOLUTION TIMING ACCURACY DRY CONTACT CHANNEL PROTECTION DRY CONTACT DETECTION RANGE RESISTOR DETECTION RANGE TRIGGER INPUT VOLTAGE VOLTAGE SENSING INPUT RANGE BREAKER OPERATION BREAKER INITIATE CAPACITY INITIATE CURRENT READING RANGE DIGITAL TRAVEL TRANSDUCER INPUT RESISTOR TYPE TRANSDUCER INPUT CONTACT TRAVEL POINT DIFFERENCE DISPLAY PRINTOUT TEST RECORD STORAGE COMPUTE INTERFACE PC SOFTWARE SAFETY ENVIRONMENT OPTIONS WARRANTY SPECIFICATIONS Special purpose test equipment, portable circuit breaker analyzer 16” W by 11” H by 14” D (40.6 cm x 29.9 cm x 35.6 cm); Weight, less than 25 lbs (11.3 kg) 90-130 Vac or 200-240 Vac (selectable), 50/60Hz 3, 6 or 12 dry-input channels. Each channel detects Main and Insertion-Resistor Contacts Selectable: 1-second, 10-seconds, 20-seconds ±50 microseconds at 1-second duration, ±500 microseconds at 10-second duration, ±1.0 milliseconds at 20-second duration 0.05% of reading, ±0.05 ms at 1-second duration Fuses protect all isolated power supplies. All contact inputs are grounded until test. TVS and Zenerdiode protected. Closed: 5,000 ohm 50 to 5,000 Ohm Open/Close: 30-300V dc or peak ac V1: analog input; 0-255V dc or peak ac, Sensitivity ±1V; V2: voltage detector (present/absent) input; 30-300V cd or peak ac Initiate Open, Close, Open-Close, Close-Open, Open-Close-Open 30A/250V ac/dc max One, Non-contact, Hall-Effect sensor, 0-20A, dc to 5Khz 3 digital travel transducer channel; Linear range, 0.0-60.0 in (±0.01 in); Rotary range 0-360° (±0.36°) 200 Ohms to 10K Ohms (optional) Measures “Slow-Close” contact-point distances (hard copy) 4 lines by 20 character back-lit LCD, sunlight viewable Both graphic contact and travel waveforms & tabulated results are printed on 4.5-inch thermal printer Store up to 100 timing records and 99 test plans USB and RS-232C port Furnished Circuit breaker analysis software running under Windows XP; features graphic display, numerical reports, and data base utility for use at shop or office. Designed to meet UL 6101A-1 Certification and CAN/CSA C22.2 No 1010.1-92 Operating: -10°C to 50°C (+15°F to +122°F); Storage: -30°C to70°C (-22°F to +158°F) Hard case for shipping; available for both Travel Transducers and CT-7000 One-year warranty on parts and labor Note: The above specifications are valid at nominal voltage and ambient temperature of +25°C (+77°F). Specifications are subject to change without notice. H.V. TEST (PTY) LTD 3 Gaiety Ave, Robindale, Randburg, South Africa, 2010 Tel: +27(11) 782 1010 Fax: +27(11) 782 2770 P.O. Box 651287, Benmore, 2010 Email: sales@hvtest.co.za Website: www.hvtest.co.za
Page 1 and 2: H.V. TEST (PTY) LTD 3 Gaiety Ave, R
Page 3: lyze Contact Timing Channel Voltage

Vanguard CT 7000 - HVTEST South Africa

Create successful ePaper yourself

Delete template?

Save as template?