1000 series Flat panel Floor stands - Monitorhalterung.de
1000 series Flat panel Floor stands - Monitorhalterung.de
1000 series Flat panel Floor stands - Monitorhalterung.de
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
140 PRO E TOR SOLUTIONS<br />
PULLE SER I E LIFT S STE S<br />
� Durable build<br />
� Low maintance<br />
� uick installation<br />
� Low noise engine<br />
Bring pro ectors at ser ice height<br />
Top D sub connector<br />
1-phase 230 volts 1 A with 1 early make, late break ground pin<br />
iddle connector<br />
coaxial contacts 5 Ohm<br />
1 early make, late break ground pin<br />
1 signal pins<br />
Lower connector<br />
coaxial contacts 5 Ohm<br />
1 early make, late break ground pin<br />
1 signal pins<br />
www.audipack.com<br />
in 10 minutes...<br />
Sa e time and money, use the Audipack pulley lift System<br />
Theatres and training centres with a sloped seating arrangement are<br />
particularly diffi cult areas where it can be almost impossible to erect<br />
scaffolding etc.<br />
These lift systems are specially <strong>de</strong>signed to lower pro ectors from<br />
the ceiling for maintenance uickly, safely and in a controlled<br />
manner.<br />
The pro ector receives its current and data signal through special<br />
connectors, which are disconnected when the lift is lowered and<br />
which restore contact when the lift is fully retracted. Pulley-lifts<br />
are e uipped with safety hooks that will secure the pro ector<br />
in retracted position. The pro ector will return to it’s exact<br />
position in the ceiling due to the 4 centration point in the lift.<br />
This will aim the pro ector exactly on the screen again.<br />
All this contributed to a more fl exible but also more safe way of<br />
presenting and servicing.<br />
The combination lift systems are standard available in 2 mo<strong>de</strong>ls,<br />
having difference in si e and lifting capacities.<br />
An Audipack pro ector mount is necessary to fi x the pro ector to<br />
the system.<br />
Standard connector confi guration