Industrial Connectors - e-catalog - Belden

The added perfect connection advantage.
Ready to go in the blink of an eye: crimping technology makes it all so easy.
Crimping is a mechanical connecting
technology in which a contact is crimped
permanently to the cable to be connected.
This is done in the blink of an eye, and
for this reason, crimping technology is
used very often when installing industrial
connectors – specifically, the use of a
crimp tool appropriate to the cable and
contact, with which the installer can
carry out crimping anywhere without any
problems.
The crimp contact however is not just easy
to make, but also ensures a permanent
and reliable electrical connection.
Connections using crimp technology are
therefore especially suitable in areas subject
to heavy vibration stresses as well as in
conveyor and vehicle technology. With a
hand-crimping tool for contacts of the NR-,
G- and ST-series or the GDM-series and
crimp contacts by Hirschmann, you are
optimally equipped to set up a very fast
connection – no matter where and when.
380