Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor ...

Contents
Repeat Dialing on Busy Signal 4-14
Retransmitting SIP requests and SIP Responses 4-15
Setting Up and Placing a Call Without Using a SIP Proxy 4-15
Configuration 4-15
Placing an IP Call 4-16
SipOutBoundProxy Support 4-16
SIP Proxy Server Redundancy 4-16
SIP Session-Timer Support 4-17
Status of Phone Service Using HTTP 4-17
STUN Support 4-18
Types of NATs 4-18
NAT Traversal 4-18
STUN Configuration Parameters 4-19
Stuttering Dial Tone on Unconditional Call Forward 4-19
Toll Restrictions for Call Forwarding and Outgoing Calls 4-19
User Configurable Call Waiting Permanent Default Setting 4-20
User Configurable Timeout On No Answer for Call Forwarding 4-20
Voice Prompt Confirmation for Call Waiting and Call Forwarding 4-20
Base Number 4-21
Relevant Bit of OpFlags Parameter 4-21
XML Pages of Cisco ATA Information 4-22
Current configuration 4-22
Current statistics 4-22
Current service values 4-22
Complete Reference Table of all Cisco ATA SIP Services 4-23
Parameters and Defaults 5-1
Configuration Text File Template 5-2
User Interface (UI) Security Parameter 5-4
UIPassword 5-4
Parameters for Configuration Method and Encryption 5-4
UseTFTP 5-5
TftpURL 5-5
CfgInterval 5-6
EncryptKey 5-6
EncryptKeyEx 5-7
Network Configuration Parameters 5-8
DHCP 5-8
StaticIp 5-9
vi
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for SIP (version 3.0)
OL-4654-01