Flyer X86 embedded - Baudisch Electronic GmbH

Baudisch.X86embedded
BCC3 Special features and details
14 TFT and touchscreen
A 3.5" colour display with touchscreen can be plugged in directly on the CPU
side of the BCC3. Corresponding holes have been drilled in the board to fasten
a holder for the display. One cut-out is sufficient in the housing lid.
Types of compatible displays and touchscreens:
3,5“ LB035Q02-TD01 (QVGA, LED backlight, integrated touchscreen)
6.4“ LB064V02EA (VGA, 800 cd/m², separate 5-wire Elo touchscreen)
10,4“ LB104V3-A1 (VGA, 400 cd/m², separate 4- or 5-wire touchscreen)
12.1“ LB121S03-TD02 (SVGA 800 x 600, 400 cd/m², 4-wire touchscreen)
The internal SM712 graphic chip with 4 MB video RAM is suitable for controlling
displays of up to 1280 x 1024 pixel, with 18 bit colour as TTL-TFT interface.
The touch controller processes 4- and 5-wire resistive touchscreens of various
manufacturers.
15 Module slots
The design permits the integration of various slot modules for highly versatile
extension of the component.
Socket strips are provided on the module side of the board accommodating up
to two sandwich modules (see graphics for arrangement).
Operating voltages and the following TTL signals are available for the additional
modules: COM2, COM3, COM4, COM5, LPT1, USB hosts, USB slave,
GPIOs, VGA.
Without the need for the RS485 port on the base board, the additional module
can offer a plug-in connection on the front.
16 X1 connector
The device connection consists of a 5-pin plug-in screw terminal. The extended
assembly versions have a 13-pin connector.
1. Shielding, housing potential
2. Ground 0V, supply
3. 12V / 24V DC supply
4. EasyLan databus
5. Ground for EasyLan databus
6. Digital input 2+ or DTR2
7. Digital input 2 – or RXD2
8. Relay output 2.1 or TXD2
9. Relay output 2.2 or GND
10. Digital input 1+
11. Digital input 1 –
12. Relay output 1.1
13. Relay output 1.2
8
www.baudisch.de