GSA Product Brochure - Continental Research Corporation

Lubricants
Continental Research
A. Creeper Lube | clear penetrating lubricant gel SIN # 834-900
Creeper Lube is a Teflon ® fortified, high pressure clear lubricant that has been specially formulated to
penetrate the tightest joints and spaces before setting up as a tacky, high impact grease. Creeper
Lube quickly penetrates to effectively lubricate and then adheres to and protects treated surfaces
between applications. Use Creeper Lube on cables, chains, hinges, joints, overhead doors, sprockets,
and any metal parts where long term lubrication is needed.
• Dispenses as a penetrating oil with capillary action
A
• Quickly penetrates to where lubrication is needed
• Sets up as sticky, high pressure, high impact grease that protects and lubricates treated areas
B. Moly Coat | anti-seize, dry film lubricant and coating SIN # 681-4
Moly Coat is a dry film aerosol lubricant with pure Molybdenum Disulfide micro-particles that prevent
friction and wear, improving operating efficiency and reducing maintenance costs. Moly Coat stops
corrosion, seizing, galling, sticking, scraping and other friction issues that occur in high pressure,
load-bearing applications.
• Applies dry – tack free and oil free
• Repels dust and dirt
B
• Plates out – fills microscopic voids in metal for long-lasting lubrication and protection
• No sling off, throw off or wash out
• Endures temperatures from -110°F to +1050°F
• Effective at pressures up to 100,000 psi
• Adheres to metals, rubber, glass, fiberglass and most plastics
C. Numb Nutz | penetrating lubricant and rust buster SIN # 684-1
Numb Nutz is the ultimate penetrating lubricant, combining rapid freezing action with advanced rust
eating XA-17 technology. Sprayed parts actually shrink, quickly breaking open micro-fine fissures
and allowing the lubricant to penetrate even the toughest rust. Numb Nutz’s advanced rust eating
formula then dissolves and converts any rust, making future maintenance easier.
• Freezing action shrinks metal & breaks open the fine fissures to release seized bolts & parts
C
• Penetrates the toughest rust
• Non-conductive up to 33,000 volts
• Saves time & avoids costly re-work
D. PF 510 | non-flammable penetrating oil SIN # 834-900
This heavy duty penetrant can be used where ordinary penetrants fail. PF-510 combines powerful rust
penetrants with capillary action lubricants to quickly loosen frozen nuts, bolts and other metal parts. It
lubricates to reduce friction and wear and leaves behind a thin, protective, easily removable film that
prevents further rust and corrosion. PF-510 will reduce down time and labor cost.
• Non-Flammable – Not ignitable by spark or flame. Ability to go where most penetrants can’t
D
16 | 800-325-4869
• Excellent Penetration – Immediately cuts through rust, corrosion and dirt to free up seized bolts,
fittings and metal parts
• Great Lubrication – Keeps parts moving smoothly & quickly. Extends the life of parts
• High Dielectric Strength – Voltage rating up to 20,000 kV
• Moisture Displacement – PF-510 displaces water and moisture from moving parts that are usually
prone to rust and corrosion, and helps prevent breakage of frozen parts