You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ENGINE PRO DELIVERS REAL RESULTS!<br />
CASE STUDY SERIES<br />
REAL ENGINE BUILDERS. REAL RESULTS.<br />
<strong>Engine</strong> builders across the country are discovering that <strong>Engine</strong> <strong>Pro</strong> engine parts<br />
help them get higher performance with lower costs. Here is another recent engine<br />
project that significantly boosted horsepower primarily using parts from <strong>Engine</strong> <strong>Pro</strong>.<br />
<strong>Pro</strong>ject: 1981 Corvette<br />
The original ’81, four-bolt “smog motor” only<br />
produced 190 horsepower–underpowered for<br />
most enthusiasts. This updated small block used<br />
the original block combined with an aftermarket<br />
rotating assembly, heads, intake and exhaust.<br />
The engine was machined, balanced and<br />
assembled using <strong>Engine</strong> <strong>Pro</strong> performance<br />
products. The results? Nearly double the original<br />
horsepower with a modest investment in parts.<br />
<strong>Engine</strong> Builder: Means Motors, Wichita, KS.<br />
Rotating assembly was balanced by Duane<br />
Saum <strong>Engine</strong>ering, Wichita, KS<br />
<strong>Engine</strong> Type:<br />
350 stroked to 383<br />
Original HP: 190 @ 4000 rpm<br />
Final HP: 360 @ 5000 rpm<br />
www.goenginepro.com<br />
37