download - Knoll

The Graham Collection Cable Management
The Graham Collection
Power Center box
Preconfigured with two power outlets and two data ports.
Order separately
The Graham Collection facilitates positioning power and data capabilities
thoughtfully, discreetly and conveniently as user needs dictate. With three
surface grommet options and hinged modesty access panels, routing wires
and cables effortlessly through-out the work space is easy and efficient.
Hinged Modesty with Access
Hinged modesties with access are available in select products for access to
wall outlets. Concealed hinges allow for 180° rotation of the upper half of
modesty downwards. Hinged modesty is short 3 1 /4 below worksurface for
wire routing.
Hinge is positioned nominally 13 1 /4 above floor level. Space behind modesty
to wall is nominally 5 deep.
Hinged modesty front is veneer, back side intended to be against wall is
backer material.
Cable management clips
Packages of 10
Plastic clip which secures to bottom of worksurfaces as defined by user to
rout cords to data or power outlets and keep the floor space free of cord
tangles. Clip is partially open on one side to allow cables to be easily hung in
clip.
Tackboard rout for task light cord escape
Tackboards are 1 1 /2 thick with wire management channel in back left and
right side for task light cord routing from beneath overhead to drop below
worksurface to power outlet.
Matrix for Recessed Hinged Modesty specifications:
overall BTS*
width
storage
width
storage
width
use hinged
modesty
Desk Grommet
4wx2 1 /4d
Edge Grommet
7 1 /2wx1 1 /2d
84 end panel 30 GHCME53
90 end panel 30 GHCME59
90 end panel 36 GHCME53
96 end panel 36 GHCME59
96 30 16 letter GHCM50
102 30 19 legal GHCM53
102 30 16 letter GHCM56
102 36 16 letter GHCM50
108 30 19 legal GHCM59
108 36 19 legal GHCM53
108 30 30 GHCM48
108 36 16 letter GHCM56
114 30 30 GHCM54
114 36 19 legal GHCM59
120 30 30 GHCM60
120 36 36 GHCM48
Recessed hinged modesties are for creating build-to-spec * credenza’s only with
the configurations listed below. Overall width represents the worksurface width,
then storage widths represent support on either left or right end of credenza with
knee space between for recessed hinged modesty.
Power Center grommet
7 1 /2wx5 1 /4d
(shown with power center box)
9