John Guest Push-Fit 1/2" - 1" - Chester Paul Company
John Guest Push-Fit 1/2" - 1" - Chester Paul Company
John Guest Push-Fit 1/2" - 1" - Chester Paul Company
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
END CAP<br />
CTS SIZES<br />
The unique feature of the<br />
Speedfit ®<br />
concept is the<br />
ability to easily connect and<br />
disconnect the End Cap. End<br />
Caps also provide a leakproof<br />
seal.<br />
They can be used to temporarily<br />
“cap-off” installations<br />
for pressure testing and<br />
rough inspections.<br />
With Speedfit ®<br />
End Caps<br />
there is no need for tools, sweating or threading. They can be used<br />
with plastic or copper pipe, and are reusable many times over.<br />
SUPERSEAL PIPE INSERT<br />
Pipe insert provides<br />
a secondary seal<br />
Main O-ring<br />
Stainless Steel Teeth<br />
grip the pipe<br />
Spacer<br />
O-rings<br />
The Superseal pipe insert has been developed for use with<br />
Speedfit ® Pipe and Speedfit ®<br />
<strong>Fit</strong>tings to provide an extra line of<br />
defense when installing a Speedfit ®<br />
<strong>Push</strong> <strong>Fit</strong> System.<br />
An o-ring at the head of the insert provides a secondary seal<br />
inside the fitting. A combination of this and the fitting o-ring ensures<br />
an even better connection.<br />
The Speedfit ®<br />
Connection, when made with the Superseal insert,<br />
has some innovative design and installation features:<br />
Sliding the stem of the insert into the pipe gives greater rigidity<br />
to the length of the pipe within the fitting, reducing the chance of<br />
leaks if a side load is applied.<br />
A connection is easier to make because the head of the insert has<br />
been designed for ease of insertion.<br />
9
Change language