Power & Distribution - Eldon

Multi-Flex
CDV, Vertical divider
VB, Vertical dividing bar
Description: The profile is identical to the enclosure frame
and provides vertical separation of the enclosure when partial
doors or cable way covers are fitted. Can be mounted in 200
mm steps.
Material: 2 mm mild steel.
Finish: RAL7035 structure powder coating.
Pack quantity: 1 set of profiles with mounting accessories.
Description: Fitted in the centre of 1200 or 1600 mm wide
enclosures to give standard mounting facilities in two vertical
sections of 600 or 800 mm. This enables separate fitting of
equipment such as swing frames, system profiles, in either
section of the enclosure.
Material: 2.0 mm zinc plated steel.
Pack quantity: 1 pair without mounting accessories.
Mounting requirement: Add VBK for mounting. For complete
separation add VBD.
H
Part No.
1800 CDV1800R5
2000 CDV2000R5
2200 CDV2200R5
VBD, Depth dividing bar
H
Part No.
1600 VB1600
1800 VB1800
2000 VB2000
2200 VB2200
VBK, Fixing brackets
Description: Fitted in the top and bottom of a 1200 mm or
1600 mm enclosure, to provide standard mounting facilities of
600 or 800 mm wide. This enables separate fitting of
accessories such as CAB(P), CBU, CLPK, CLPF etc., in either
side of the enclosure. Accessories are adjustable in depth
within the 25 mm hole pattern.
Material: 2.0 mm zinc plated steel.
Pack quantity: 1 pair without mounting accessories.
Mounting requirement: Add VBK for mounting. Add VB for a
complete separation.
Description: Mounting brackets for the VB or VBD in 1200 or
1600 mm wide enclosure. It does not interfere with bottom
plates.
Material: 3.0 mm zinc plated steel.
Pack quantity: 4 pieces with mounting accessories.
D
Part No.
400 VBD400
500 VBD500
600 VBD600
800 VBD800
W
Part No.