DATA SHEET - Yageo

More documents

Recommendations

Info

Product specification 6 Chip Resistor Surface Mount RC SERIES 1206 (RoHS Compliant) 9 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Coefficient of Resistance (T.C.R.) IEC 60115-1 4.8 At +25/–55 °C and +25/+125 °C Formula: R 2 –R 1 T.C.R= ------------------------- ×10 6 (ppm/°C) R 1 (t 2 –t 1 ) Where t 1 =+25 °C or specified room temperature t 2 =–55 °C or +125 °C test temperature R 1 =resistance at reference temperature in ohms R 2 =resistance at test temperature in ohms Refer to table 2 Life/Endurance IEC 60115-1 4.25.1 At 70±5 °C for 1,000 hours, RCWV applied for 1.5 hours on, 0.5 hour off, still air required ±(1.0%+0.05 Ω) for 1% tol. ±(3.0%+0.05 Ω) for 5% tol.
Product specification 7 Chip Resistor Surface Mount RC SERIES 1206 (RoHS Compliant) 9 TEST TEST METHOD PROCEDURE REQUIREMENTS Board Flex/ Bending IEC 60068-2-21 Chips mounted on a 90mm glass epoxy resin PCB (FR4) 2 mm bending Bending time: 60±5 seconds ±(1.0%+0.05 Ω) for 1%, 5% tol.
Page 1 and 2: 1100 DATA SHEET GENERAL PURPOSE CHI
Page 3 and 4: Product specification 3 Chip Resist
Page 5: Product specification 5 Chip Resist
Page 9: Product specification 9 Chip Resist

DATA SHEET - Yageo

Create successful ePaper yourself

Delete template?

Save as template?