2013 Yates Catalog pdf

PULLEYS
RSI Pulleys
Lightweight, strong, swing sideplate pulleys for
work and rescue. Available in Oilite ® bushing or
sealed bearing versions.
Rock Exotica Omni Blocks ®
The Rock Exotica Omni Blocks combine a
top swivel with a ball bearing sheave. These
pulleys eliminate twisting and simplify your
rope rigging system and save valuable vertical
height compared to a conventional pulley/carabiner/swivel
combination. Each precision
machined aerospace alloy block has
a unique button-activated release feature
that allows instant access to the sheave for
midline attachment. The milled alloy attachment
eye is large enough to accept most
carabiners and snaps. 1.5 inch tread diameter
pulley accepts up to 1/2 inch rope.
Strength is 8100 lbf. (36 kN). Made in USA.
6300 Single Sheave
6310 Double Sheave
2 Inch Double Sheave Pulley
with Becket
Designed for use in multiple pulley mechanical
advantage systems. Two 2.75 inch sheaves. Accepts
rope up to 5/8 inch. Main rigging point can accommodate
three carabiners. Strength 12,000 lbf. (53kN).
6122 Oilite Bushing
6122B Sealed Bearing
3 Inch Rescue Pulley
Designed for ropes up to 5/8 inch. Triangular rigging
hole accepts up to three carabiners. Strength 10,000
lbf. (44kN).
6113 Oilite Bushing
6113B Sealed Bearing
3 Inch Double Sheave Pulley
with Becket
Designed for use in multiple pulley mechanical
advantage systems. Accepts rope up to 5/8 inch.
Two 2.75 inch diameter sheaves separated by a high
strength alloy aluminum plate. Triangular rigging
hole accepts up to three carabiners. Strength 12,000
lbf. (53kN).
6125 Oilite Bushing
6125B Sealed Bearing
4 Inch Rescue Pulley
Designed for ropes up to 5/8 inch. Triangular rigging
hole accepts up to three carabiners. Strength
10,000 lbf. (44kN).
6114 Oilite Bushing
6114B Sealed Bearing
6320 Rock Exotica
Omni Aztek Elite ® Blocks
Configured in haul systems these blocks
will enable the user great versatility in a
personal mechanical advantage system
suitable for rescue and general rigging.
Engineered to withstand over 8,000 lbf.
(36kN). The set comes in two colors for
ease of identification. One configuration
provides a 5:1 mechanical advantage. Turn
it around for a 4:1 with change of direction.
Progress capture ratchet prusik can be
attached at either end. One quick pin with
each set of blocks. Additional pins may be
purchased separately.
4 Inch Triple Sheave Pulley
Designed for ropes up to 5/8 inch. Triangular rigging
hole accepts up to three carabiners. Strength 15,000
lbf. (66kN).
6134 Oilite Bushing
6134B Sealed Bearing
Extra Wide Pulley
Passes knots in ropes up to 5/8 inch in diameter.
High strength alloy aluminum. 4 inch sheave that is
3 inches wide. Only in Oilite version. Strength 9000
lbf. (40kN).
6116 Oilite Bushing
18