Stirrers and mixing stations - Eibenstock

Accessories
Mixing stand RST 10
– Wing nuts for quick fixing and
no need for tools
– Metal parts galvanised – rust protection
– Compact design,
lightweight – easy transport
SPECIFICATIONS RST 10
Dimensiones L x W x H
Max. size of bucket Ø x H
Batches up to
Weight
Mixing stand RST 30
– Quick attachment of stirrers on the
mixing stand without any tools
– Adjustable machine holder height
– Large base plate – safe standing
position
– For all EIBENSTOCK stirrers with
H-handle, except for contra twin stirrer
670 x 360 x 36 mm
340 x 450 mm
30 l
6,4 kg
Order no. 09410
Supplied
SPECIFICATIONS RST 30
Dimensiones L x W x H
Max. size of bucket Ø x H
Batches up to
Weight
in a box
without mixing bucket
560 x 490 x 860 mm
300 x 350 mm
30 l
13,7 kg
Order no. 09402
Supplied
in a box, stand with rollers,
fixation for bucket
Disc stirring rod, galvanised
The stirring rod for liquid media for use with high-speed
tools. Quick and smooth running mixing.
Round stirring rod, galvanised
The stirring rod for liquid and viscous media, e.g. wall paints
for inside and outside, emulsion paints, lacquers, zinc dust
paints, mineral paints, silicate paints, cement paints, minium,
chemicals, bitumen, casting compounds, laitances.
Helicon ribbon stirring rod, galvanised
The powerful stirring rod for sticky and tough materials, e.g.
prefab plaster and mortar, adhesive mortar, preparation binder,
gypsum, lime, cement facing, screed, concrete, tile cement,
bonding, pastes, granulates, quartz-filled epoxy resins.
Mortar stirring rod, galvanised
The particularly robust stirring rod for heavy and highly viscous materials,
e.g. prefab plasters and mortar, lime, concrete, cement, screed,
filling compound, insulating plasters, quartzfilled epoxy resins.
Mortar stirring rod, Stainless steel
The stainless steel stirring rod with high durability is particularly
suitable for abrasive materials, food (e.g. honey) and fodder. Please
check suitability if the material contains acids or caustics!
Glue stirring rod, galvanised
The stirring rod especially for sticky media is particularly suitable
for epoxy resin components, concrete coatings, adhesive
materials and filling compounds.
Filler stirring rod, galvanised
The filler stirring rod lifts up material settled on the bottom of
the bucket (e.g. prefab filler and concrete coatings) and mixes
it at low speed, thus preventing air inclusions.
Mixing paddle, galvanised
The mixing paddle for heavy materials - and can be used with
the RST 91 mixing stand and bucket - is suitable for bitumen,
clay, thick-film, emulsions and sealing materials. The RP 120
is stainless steel.
right hand spiral (standard):
Stirring rod pulls material from the bottom – few air inclusions,
easy guiding, for tough materials
left hand spiral (MG xxx L):
Stirring rod pushes material from the top to the bottom – less
splash during mixing for media of low viscosity
Mixing stand RST 91
– Quick attachment of stirrers on the
mixing stand without any tools
– Adjustable machine holder height
– Large base plate – safe standing
position
– For all EIBENSTOCK stirrers incl. collar
and various other brands
SPECIFICATIONS RST 91
Column height
Collar diameter
Reducing rings diameter Ø
Base plate dimensiones
Lift length
Weight
1.500 mm
60 mm
60-46/60-43 m
500 × 700 mm
1.000 mm
18,3 kg
Order no. 09403
Supplied
in a box incl. reducing rings
Material S R W M MGV LG SPG RP
Wall paint
Emulsion paint
Lacquer
Zinc dust paint
Mineral paint
Silicate paint
Red lead coat
Chemicals
Food
Bitumen
Grouting compounds ()
Cement laitance () ()
Plaster / chalk ()
Adhesive mortar
Ready blended screedmortar ()
Glue
Concrete () ()
Tile adhesive
Filling compound
Ready mixed fillee
Granules / plaster
Thermal insulating plaster ()