5. Sample preparation Sampling 454 Grinding 466 ... - Labochema

GENERAL CATALOGUE 2010/11
5. Sample preparation
Grinding/Mills
1 2
1 2
Jaw crushers, Pulverisette 1 (2 Types)
For intermittent or continuous coarse-crushing, of medium-hard to extremely hard, soft
to brittle and hard-tough solid materials.
Fritsch
Typical uses:
Mining and metallurgy, chemistry, geology and mineralogy, glass, ceramics, rocks and soils.
Operational features:
The sample is crushed under high pressure, between two crushing plates in an enclosed chamber.
Performance overview:
- very fast, uniform size reduction
- crushing plates available in 5 different materials and easily interchangeable
- gap adjustment, which enables continuous adjustment of the final fineness
- closed grinding chamber with connection for dust extraction for dust-free operation
- easy to clean, minimum contamination between samples
- can be combined with Disk mill Pulverisette 13
- tested safety (CE marked)
- 24 month warranty
Supply requirements, Models I/II:
400V 50/60Hz 3-ph., 1450/2780 Watt. With crushing plates and side support walls made of hardened tool steel.
Crushers are also available in other voltages and with fittings made of stainless steel, chromium-free steel, hardmetal
tungsten carbide, zirconium oxide and manganese steel. These can easily be exchanged or the jaw crusher can be
ordered ready-equipped with the fittings required - details on request.
Specifications
Hopper opening
Max. feed size
Throughput volume
Gap width (fineness)
Supply requirements:
Dimensions (WxDxH)
Net weight:
Model I/Model II
65 x 65mm/100 x 100mm
approx. 60mm/approx. 95mm
up to 140 kg/h/up to 200 kg/h
1 to 15mm/1 to 15mm
400V 50/60Hz 3-ph/400V 50/60Hz 3-ph
400 x 800 x 800mm/400 x 800 x 800mm
177kg/205kg
Type Rating PK Cat. No.
W
Pulverisette 1 type I
Pulverisette 1 type II
1450
2780
1
1
9.519 213
9.519 223
E & OE.
475