Pendants - Lamps & Lighting Ltd

IP66 Time Delay Switch
Energy saving time delay switch enables timed
control of lighting or heating. The unit is mounted in
a durable IP66 enclosure and is designed for
exterior use or where moisture is present. Only a
light press is required for activation of the load for
a preset time period; adjustable from one second
to two hours. Ideal for control of Quartz halogen
heat lights.
Energy Saving Controls
Features:
• IP66 (dust tight & strong water jet proof)
• 1 sec. to 2 hrs. adjustable timing period via
thumbwheel at rear of the circuit board
• Load
• 16A resistive load
• 10A incandescent lighting
• 6A linear fluorescent lighting (max 6 luminaires
recommended)
• 3A compact fluorescent lighting
• 3A low voltage lighting (switch primary of
transformer)
• Can control up to two 1300w Quartz halogen
heat lights (see page 291)
• Caps provided to cover holes (maintains IP66)
if necessary to screw through rear of the unit
• Terminal capacity 4mm
• Operating temperature -10°C to 35°C
• Corrosion resistant
Material: polycarbonate
Finish: grey
IP66 Time Delay Switch
Ordering Code
IP66 exterior time delay switch TDSX 16
These products are designed to comply with
EMC-89/336/EEC LVD-73/23/EEC
66
294 www.lampslighting.co.uk