BSS | Fastening systems - OBO Bettermann

More documents

Recommendations

Info

Flange clamp systems Bolt tie MMS hex Type Dimension mm MMS10 10 x 80 Drill hole Ø mm 8 Dimension L mm 80 Pack. Weight Item No. pcs kg/% pc ST / G 50 3.800 3498 12 3 ST / G MMS10 10 x 100 8 100 50 4.600 3498 15 8 Price /% pc Fire protection bolt tie with hexagonal head for direct installation without additional anchors. Substrate: concrete or masonry. WAF 16. Drill hole 8 mm. Fire protection tested according to DIN 4102. Fire resistance class to F90. 05 BSS_Katalog_2008 / en / 30/03/2009 (LLExport_00043) 390 BSS Always indicate the article number when ordering.
Flange clamp systems Bolt tie General DIBt construction approval for concrete substrates Tested in accordance with DIN 4102 Fire resistance classes to F90 Approved data Substrate Concrete Masonry KSV, KSL, Vz Load max. [kN] 30 minutes 90 minutes MMS6 0.80 0.35 MMS7.5 1.25 0.50 OBO Bettermann's fire protection bolt ties, type MMS, were fire-tested in a manner similar to DIN 4102. The maximum load capacity, depending on the fire resistance class, was determined for different types of masonry. These values are documented in an appropriate test certificate. Taking the occurring loads for the function maintenance application and for false ceiling mounting into account, the determined load capacities for the different masonry types are absolutely sufficient. The fire protection bolt tie can simply be screwed directly into the drill hole without additional anchors. Drilling the fastening hole Blowing out of the drill hole Fixing the fire protection bolt tie Drill the fastening hole in accordance with the specifications in the mounting instructions. The drill hole depth must be at least 2 cm deeper than the length of the bolt tie. Any layer of plaster should not be taken into account in the minimum setting depth. Fastening the component Free the drill hole of dust by blowing it out. Fastened fire protection bolt tie Push the fire protection bolt tie through the fastening hole of the appropriate component and fix in the drill hole. 05 BSS_Katalog_2008 / en / 30/03/2009 (LLExport_00043) Turn the bolt tie into the drill hole. Turning in can take place using a rechargeable or ratchet screwdriver, or also by hand. Ideal fastening option with fire protection classification for various types of masonry. Always indicate the article number when ordering. BSS 391
Page 1 and 2: BSS Fire protection systems Systems
Page 3 and 4: Local Support & advice OBO Betterma
Page 5 and 6: Modern buildings are becoming incre
Page 7 and 8: Contents General fire protection pr
Page 9 and 10: General fire protection principles
Page 11 and 12: General fire protection principles
Page 13 and 14: Main danger of smoke creation: 1 kg
Page 15 and 16: 1st protection aim: Limit the sprea
Page 17 and 18: 3rd protection aim: Important elect
Page 19 and 20: Training courses and seminars Safet
Page 21 and 22: Escape route installation systems F
Page 23 and 24: Fastening systems Basic principles
Page 25 and 26: Tested fire protection anchors for
Page 27 and 28: Injection tie Injection mortar FIS
Page 29 and 30: Flange clamp systems Type Thread FH
Page 31 and 32: Flange clamp systems Type FNA II 6
Page 33 and 34: Flange clamp systems Type Back cut
Page 35 and 36: Flange clamp systems Applying the i
Page 37: Flange clamp systems Bolt tie Gener
Page 41 and 42: Flange clamp systems Bolt tie Gener
Page 43 and 44: Flange clamp systems Bolt tie Teste
Page 45 and 46: 05 BSS_Katalog_2008 / en / 30/03/20
Page 47 and 48: Information Test marks 400 Pictogra
Page 49 and 50: Information Test marks Deutsches In
Page 51 and 52: Information Pictogram explanation F
Page 55 and 56: Alphabetical table of contents U U
Page 57 and 58: Numeric directory 05 BSS_Katalog_20
Page 61 and 62: Type listing Type Dimensions/Colo E
Page 71 and 72: 421
Page 73 and 74: 423

BSS | Fastening systems - OBO Bettermann

Create successful ePaper yourself

Delete template?

Save as template?