etp hydro-grip gpw-25 ok
etp hydro-grip gpw-25 ok
etp hydro-grip gpw-25 ok
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ETP HYDRO-GRIP GPW-<strong>25</strong><br />
OK<br />
Max 5 Nm<br />
1<br />
2<br />
3<br />
4<br />
6<br />
5<br />
1<br />
3<br />
4<br />
2<br />
Tolerance on the tool shank<br />
Toleranz des Werkzeugschaftes<br />
Tolérance de queue d’outil<br />
Toleranza stelo utensile<br />
Toleramcia de la espiga de la<br />
herramienta<br />
Työkalun varren toleranss<br />
Tolerans på verktygsskaft<br />
NOTE<br />
It is very important that the toolshank Ø <strong>25</strong> has a correct tolerance h7<br />
or g6 and a minimum shaftlength of 48,5 mm.<br />
For safety reason the end of the toolshank must be equipped with defined<br />
screw and nut.<br />
ACHTUNG<br />
Es ist sehr wichtig, dass der Werkzeugschaftr Ø <strong>25</strong> die korrekte Toleranz<br />
h7 oder g6 und eine Schaftlänge von mindestens 48,5 mm hat.<br />
Aus Sicherheitsgründen soll der Schaft mit angegebener Schraube und<br />
Mutter ausgerüstet sein.<br />
M8x<strong>25</strong> ISO 4762<br />
M8 ISO 4035<br />
M8<br />
/ <strong>25</strong> 0<br />
-0,021<br />
16<br />
19-24<br />
Min. 48.5