[GIT]: Networking - DerKeiler Linux Archive
[GIT]: Networking - DerKeiler Linux Archive
[GIT]: Networking - DerKeiler Linux Archive
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ath5k: add led pin configuration for compaq c700 laptop<br />
Marek Vasut (1):<br />
libertas: Add support for Marvell Libertas CF8305<br />
[<strong>GIT</strong>]: <strong>Networking</strong><br />
Mark Kelly (2):<br />
r6040: remove unused pioaddr variable<br />
r6040: move down second PHY detection to r6040_init_one<br />
Mark Smith (3):<br />
ipv6: correct return on ipv6_rcv() packet drop<br />
econet: use NET_RX_SUCCESS instead of magic number 0 for econet_rcv successful return<br />
Use correct NET_RX_* returns for atalk_rcv()<br />
Matt Carlson (48):<br />
tg3: Fix 57780 asic rev PCIe link receiver errors<br />
tg3: Prevent tx BD corruption<br />
tg3: Fix TSO test against wrong flags var<br />
tg3: Preserve PCIe MPS setting for new devs<br />
tg3: Add 57788, remove 57720<br />
tg3: Tune 5785 clock switching<br />
tg3: Create MII_TG3_FET namespace<br />
tg3: Convert code to use PHY_IS_FET<br />
broadcom: Add BCM50610M support<br />
broadcom: Add AC131 phy support<br />
broadcom: Make the 57780 IEEE compliant<br />
tg3: Update version to 3.100<br />
tg3: Delay mdio bus init until fw finishes<br />
tg3: Add new 5785 10/100 only device ID<br />
tg3: Reformat NVRAM case statements<br />
tg3: Break out mini producer ring handling<br />
tg3: Move the JUMBO_CAPABLE and SUPPORT_MSI flags<br />
tg3: Clarify rx buffer relationships<br />
tg3: Create rx producer ring setup routines<br />
tg3: Create a new prodring_set structure<br />
tg3: Use ext rx bds<br />
tg3: Cleanup interrupt setup / teardown<br />
tg3: Move napi to per−int struct<br />
tg3: Convert ISR parameter to tnapi<br />
tg3: Convert napi handlers to use tnapi<br />
tg3: Move general int members to a per−int struct<br />
tg3: Move per−int rx members to per−int struct<br />
tg3: Move per−int tx members to a per−int struct<br />
tg3: Update version to 3.101<br />
tg3: inline tg3_cond_int()<br />
tg3: Add per−int coalesce now member<br />
tg3: Create tg3_rings_reset()<br />
tg3: Add support code around kernel interrupt API<br />
tg3: Add MSI−X support<br />
tg3: Add mailbox assignments<br />
tg3: Add tx and rx ring resource tracking<br />
[<strong>GIT</strong>]: <strong>Networking</strong> 28