Catalogue Lee Precision 2014

INTRODUCTION TO RELOADING
A reloading press and a set of Lee Dies
are all you need to start reloading. Lee
Dies are complete with powder measure,
shell holder and complete instructions,
including load data that tells you how
much and what type of powder to use.
Dies and presses basically last a lifetime,
so buying on what your budget allows
makes the most sense. You will never
regret buying a value priced press,—as
no matter how sophisticated a press you
own— you always have need for a simple
press for odds and ends jobs. If you mount
your press with the Lee Bench Plate,
your second press is always at the ready.
If you don’t have a workbench consider
the Lee Reloading Stand, built for the
ultimate in rigidity and convenience.
Reloading handgun and rifle cases have
similarities but are different enough that
we have broken the steps out into their
own categories. All applicable products
are shown.
CHARGE
SEAT& CRIMP
HANDGUN
Bullet
Seating Die
Auto Disk Powder
Measure pg 17
Powder Funnel and
Dippers pg 19
EXPAND THE CASE MOUTH
AND CHARGE POWDER.
Lee handgun dies are unique
in that you can charge
powder during this operation
CHARGE POWDER
HANDGUN
Powder Through
Expanding Die
SEAT AND CRIMP
THE BULLET
HANDGUN
Carbide Factory
Crimp Die
OPTIONAL
FACTORY
CRIMP DIE
In most circumstances
will improve velocity,
uniformity and in all
cases, factory-like
utility & dependability.
RIFLE
Bullet
Seating Die
Perfect Powder
Measure pg 18
Powder Funnel with Dipper pg 19
SEAT
THE BULLET
RIFLE
Factory Crimp DIe
The only effective
way to crimp bottle
neck cartridges
www.leeprecision.com
3
3